Direct ink writing of ceramic matrix composite structures
Top Cited Papers
- 5 July 2017
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 100 (10) , 4397-4401
Abstract
We present the development of an ink containing chopped fibers that is suitable for direct ink writing ( DIW ), enabling to obtain ceramic matrix composite ( CMC ) structures with complex shape. We take advantage of the unique formability opportunities provided by the use of a preceramic polymer as both polymeric binder and ceramic source. Inks suitable for the extrusion of fine filaments (30 vol% for a nozzle diameter of 840 μm) were formulated. Despite some optimization of ink rheology still being needed, complex CMC structures with porosity of ~75% and compressive strength of ~4 MPa were successfully printed. The process is of particular interest for its ability to orient the fibers in the extrusion direction due to the shear stresses generated at the nozzle tip. This phenomenon was observed in the production of polymer matrix composites, but it is here employed for the first time for the production of ceramic matrix ones. The possibility to align high aspect ratio fillers using DIW opens the path to layer‐by‐layer design for optimizing the mechanical and microstructural properties within a printed object, and could potentially be extended to other types of fillers.Keywords
This publication has 27 references indexed in Scilit:
- SiOC ceramics with ordered porosity by 3D-printing of a preceramic polymerJournal of Materials Research, 2013
- A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic SensorsPLOS ONE, 2012
- Composites Reinforced in Three Dimensions by Using Low Magnetic FieldsScience, 2012
- Correlation Between Intrinsic Microstructure and Piezoresistivity in a SiOC Polymer‐Derived CeramicJournal of the American Ceramic Society, 2011
- Polymer‐Derived Ceramics: 40 Years of Research and Innovation in Advanced CeramicsJournal of the American Ceramic Society, 2010
- A Novel Process for the Manufacture of Ceramic Microelectrodes for Biomedical ApplicationsInternational Journal of Applied Ceramic Technology, 2008
- Silicon oxycarbide glasses for blood-contact applicationsActa Biomaterialia, 2005
- Chemical Durability of Silicon Oxycarbide GlassesJournal of the American Ceramic Society, 2002
- Silicon Oxycarbide Ceramic Foams from a Preceramic PolymerJournal of the American Ceramic Society, 1999
- Orientation effects in freeformed short-fiber compositesComposites Part A: Applied Science and Manufacturing, 1999