Optimizing PV/T collector performance using coupled solid and porous layer configurations
Authors:
Open Access
- 21 May 2026
- journal article
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Abstract
Recent research on photovoltaic/thermal (PV/T) collectors has focused on two key strategies to enhance performance: geometric modifications of the thermal flow channel (such as fins, baffles, and ribbed structures) and the integration of advanced materials like phase change materials (PCMs) and porous media to improve heat transfer and overall efficiency. In this direction, this numerical study investigates the performance enhancement of a photovoltaic/thermal (PV/T) solar collector through the integration of a solid layer along the lower wall of the airflow channel, coupled with a porous medium. The solid layer is introduced to accelerate the airflow and intensify convective heat transfer, thereby improving the thermal management of the photovoltaic cells. To solve the governing transport equations, an in-house computational code was developed in the Fortran programming language based on the finite volume method, coupled with the SIMPLER algorithm. The effects of solid-layer thickness and length, porous-layer thickness, and Darcy number are systematically investigated under a constant Reynolds number (Re = 500) and a uniform heat flux of 1000 W/m². The obtained results show that increasing the solid-layer thickness significantly enhances airflow acceleration and leads to a pronounced reduction in PV cell temperature of up to 33 °C. Extending the solid-layer length further improves the convective cooling process and increases both electrical and thermal efficiencies. When combined with a sufficiently permeable porous layer, additional performance gains are achieved, particularly at high Darcy numbers (Da = 10 − 1 ). Compared to a conventional PV/T collector, the optimized configuration demonstrates enhancements of up to 60% in thermal efficiency and 28% in electrical efficiency.Keywords
Funding Information
- Miskolci Egyetem
This publication has 38 references indexed in Scilit:
- Optimizing temperature uniformity in PV/T-PCM systems with non-uniform T-shaped finsApplied Thermal Engineering, 2025
- Enhancing Air-Based PVT Performance: A numerical and experimental assessment of V-Baffle designsApplied Thermal Engineering, 2024
- A comprehensive investigation of porous media’s effects on the performance of photovoltaic thermal systemsApplied Thermal Engineering, 2024
- Mixed convection air-cooled PV/T solar collector with integrate porous mediumJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2024
- Passive heating process enhancement of a new structure room using porous‐covering heat‐emitting channelsHeat Transfer, 2023
- Parametric investigation of photovoltaic-thermal systems integrated with porous phase change materialApplied Thermal Engineering, 2022
- An experimental study of a photovoltaic thermal air collector (PVTAC): A comparison of a flat and the wavy collectorApplied Thermal Engineering, 2019
- Sensitivity analysis and performance evaluation of the PEMFC using wave-like porous ribsApplied Thermal Engineering, 2019
- Solar Engineering of Thermal Processes2013
- Capabilities and limitations of 2-dimensional and 3-dimensional numerical methods in modeling the fluid flow in sudden expansion microchannelsMicrofluidics and Nanofluidics, 2006