Decoupling Thermal and Autogenous Strain of Concretes with Different Water/Cement Ratios During the Hardening Process
Authors:
- 10 July 2017
- journal article
- Published by ASTM International in Advances in Civil Engineering Materials
- Vol. 6 (2) , 1-22
Abstract
At early age, the autogenous strain and the coefficient of thermal expansion (CTE) are two of the most important concrete properties that are responsible for volume changes of cement-based materials and therefore for possible cracking in concrete structures (especially massive structures). Autogenous strain and CTE are dependent on the water/cement (W/C) ratio. A new experimental approach was developed to define both properties as well as the initial and final setting time with a single test. Every two hours, thermal variations of 3 °C are applied on a concrete sample with the device so-called BTJADE (from the French acronym BéTon au Jeune Age, Déformation Endogène). The initial setting time is the moment when the value of the CTE no longer corresponds to a liquid. The final setting time corresponds to a zero value of the derivative of the autogenous strain before the swelling of the concrete. Results of the initial and final setting time are compared to the evolution of the transmission of the ultrasound P- and S-waves. Three different compositions are investigated to define the influence of the W/C ratio (0.4, 0.5, and 0.6), and a fourth composition, for which the binder is composed of only 25 % cement, is also used in order to validate all observations. A new model expressed in function of the equivalent time or the advancement degree of reaction (defined with isothermal calorimetry) is proposed for computational modelling of the autogenous strain and the CTE. Effect of the W/C ratio and the physical mechanisms are highlighted.Keywords
This publication has 52 references indexed in Scilit:
- Creep testing of concrete since setting time by means of permanent and repeated minute-long loadingsCement and Concrete Composites, 2016
- Testing Concrete E‐modulus at Very Early Ages Through Several Techniques: An Inter‐laboratory ComparisonStrain, 2016
- Moisture dependence of thermal expansion in cement-based materials at early agesCement and Concrete Research, 2013
- Early‐age behaviour of precast concrete immersed tunnel based on degree of hydration conceptStructural Concrete, 2013
- Effects of early-age thermal behaviour on damage risks in massive concrete structuresEuropean Journal of Environmental and Civil Engineering, 2012
- Early-age behaviour of concrete in massive structures, experimentation and modellingNuclear Engineering and Design, 2010
- Early age behaviour of concrete supercontainers for radioactive waste disposalNuclear Engineering and Design, 2009
- Modelling of concrete at early ages: Application to an externally restrained slabCement and Concrete Composites, 2006
- Finite element simulation of thermal cracking in massive hardening concrete elements using degree of hydration based material lawsComputers & Structures, 2002
- Prediction of cracking within early-age concrete due to thermal, drying and creep behaviorCement and Concrete Research, 2002