Indium doped CsPbI3 films for inorganic perovskite solar cells with efficiency exceeding 17%
Authors:
- 28 May 2020
- journal article
- research article
- Published by Tsinghua University Press in Nano Research
- Vol. 13 (8) , 2203-2208
Abstract
In recent years, all-inorganic perovskite materials have set off a research boom owing to features, such as good thermal stability, suitable bandgap, and fascinating optical properties. However, the power conversion efficiency (PCE) and the ambient stability of all-inorganic perovskite solar cells still remain a challenge. Herein, we investigate the effect of the addition of InI3 into CsPbI3 film on the corresponding device. InI3 incorporation could retard the crystallization process and control the growth rate of CsPbI3 polycrystalline films, yielding a high quality film with large grains and few voids. The increment in electrostatic potential and the reduction of carrier recombination enabled the open-circuit voltage of fabricated perovskite solar cell to be increased from 0.89 to 0.99 V. The champion device delivered a power conversion efficiency of 17.09%, which is higher than 14.36% for the reference device. And the InI3-included solar cell without any encapsulation retained 77% of its original efficiency after 860 h aging at room temperature in N2 condition.Keywords
This publication has 46 references indexed in Scilit:
- High Efficiency Pb–In Binary Metal Perovskite Solar CellsAdvanced Materials, 2016
- Grain boundary dominated ion migration in polycrystalline organic–inorganic halide perovskite filmsEnergy & Environmental Science, 2016
- Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cellsNature Communications, 2015
- How Important Is the Organic Part of Lead Halide Perovskite Photovoltaic Cells? Efficient CsPbBr3 CellsThe Journal of Physical Chemistry Letters, 2015
- Temperature- and Component-Dependent Degradation of Perovskite Photovoltaic Materials under Concentrated SunlightThe Journal of Physical Chemistry Letters, 2015
- Review of recent progress in chemical stability of perovskite solar cellsJournal of Materials Chemistry A, 2014
- Interface engineering of highly efficient perovskite solar cellsScience, 2014
- The identification, characterization and mitigation of defect states in organic photovoltaic devices: a review and outlookEnergy & Environmental Science, 2013
- Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%Scientific Reports, 2012
- Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic CellsJournal of the American Chemical Society, 2009