Forming Nanocrystalline Surface Layers in Copper Using Friction Stir Processing
Authors:
- 27 June 2011
- journal article
- research article
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 26 (7) , 922-925
Abstract
In the present work, a nanostructured layer was formed on the surface of pure copper via friction stir processing (FSP). The surface nanostructuring can be of significant importance in terms of surface-dependent properties such as fatigue, wear, coating, and even corrosion. During FSP, the applied rotating and traverse speeds were 1600 rpm and 50 mm/min, respectively. The results show that a nanograin layer of about 90 µm thick, having the grain size of 50–200 nm, was formed on the surface of pure copper. The nanostructured layer was then characterized using atomic force microscopy (AFM), field emission scanning electron microscopy (FESEM), as well as scanning electron microscopy (SEM). The microhardness of nanograin layer (175 Hv) was about three times that of the base material (60 Hv).Keywords
This publication has 19 references indexed in Scilit:
- Biaxial Stressing of Sheets of Friction Stir Processed Aluminum Alloy A319Materials and Manufacturing Processes, 2010
- Multiobjective Optimization of Friction Stir Welding Process Parameters on Aluminum Alloy AA 5083 Using Taguchi-Based Grey Relation AnalysisMaterials and Manufacturing Processes, 2010
- Modeling the Control of an Elevated Tool Temperature and the Affects on Axial Force During Friction Stir WeldingMaterials and Manufacturing Processes, 2010
- Experimental study on Friction Stir Welding of copper metalsJournal of Materials Processing Technology, 2010
- An Investigation of Friction During Friction Stir Welding of Metallic MaterialsMaterials and Manufacturing Processes, 2009
- Effect of Tool Pin Profile and Tool Rotational Speed on Mechanical Properties of Friction Stir Welded AA6061 Aluminium AlloyMaterials and Manufacturing Processes, 2008
- Friction Stir Processing Technology: A ReviewMetallurgical and Materials Transactions A, 2008
- Influence of Tool Geometry in Friction Stir WeldingMaterials and Manufacturing Processes, 2008
- Influences of pin profile and rotational speed of the tool on the formation of friction stir processing zone in AA2219 aluminium alloyMaterials Science and Engineering: A, 2007
- Microstructural Modelling for Friction Stir Welding of Aluminium AlloysMaterials and Manufacturing Processes, 2007