The Effect of He Implantation on the Tensile Properties and Microstructure of Cu/Fe Nano‐Bicrystals
Authors:
- 12 October 2012
- journal article
- research article
- Published by Wiley in Advanced Functional Materials
- Vol. 23 (10) , 1281-1288
Abstract
In situ uniaxial tensile experiments on as‐fabricated and helium‐implanted 100 nm‐diameter Cu/Fe bicrystals unearth the effect of individual face‐centred‐cubic/body‐centred‐cubic (fcc‐bcc) interfaces on improving radiation‐damage tolerance and helium absorption. Arrays of nanotensile specimens, each containing a single Cu grain in the bottom half and a single Fe grain on top, were fabricated by templated electron‐beam lithography and electrodeposition. Helium is implanted at 200 keV to a dose of 1014 ion/cm2 nominally into the interface region. High‐resolution, site‐specific transmission electron microscopy (TEM) and through‐focus analysis reveal that the interfaces are nonplanar and contain ≈5 nm‐spaced He bubbles with diameters of 1–2 nm. Nanomechanical experimental results show that the irradiated samples exhibit yield and ultimate tensile strengths more than 60% higher than the as‐fabricated ones, while they retain comparable ductility. Tensile failure always occurs gradually, along the interfaces, with no noticeable shape localization. The absence of brittle failure in He‐irradiated metals might be explained, in part, by the inability of the small He bubbles to serve as sufficient stress concentrators for cracking. In addition, the non‐orthogonal orientation of the interfaces with respect to the loading axes results in the development of both normal‐ and shear‐stress components. Tensile loading along the pillar axes may cause those interfacial regions subjected to normal stresses to detach, while the inclined regions, subjected to shear, to carry plastic deformation until final fracture.Keywords
This publication has 31 references indexed in Scilit:
- Heterogeneous dislocation nucleation from surfaces and interfaces as governing plasticity mechanism in nanoscale metalsJournal of Materials Research, 2011
- In situ nanocompression testing of irradiated copperNature Materials, 2011
- Interface enabled defects reduction in helium ion irradiated Cu/V nanolayersJournal of Nuclear Materials, 2010
- Fabrication and Microstructure Control of Nanoscale Mechanical Testing Specimens via Electron Beam Lithography and ElectroplatingNano Letters, 2009
- He ion irradiation damage in Fe/W nanolayer filmsJournal of Nuclear Materials, 2009
- Observation and analysis of defect cluster production and interactions with dislocationsJournal of Nuclear Materials, 2004
- Helium accumulation in metals during irradiation – where do we stand?Journal of Nuclear Materials, 2003
- Low temperature tensile properties of steels containing high concentrations of heliumJournal of Nuclear Materials, 2003
- Effect of implanted helium on tensile properties and hardness of 9% Cr martensitic stainless steelsJournal of Nuclear Materials, 2003
- An evaluation of low temperature radiation embrittlement mechanisms in ferritic alloysJournal of Nuclear Materials, 1994