Production of multiply charged Si and Fe ions from solid materials by sputtering and evaporating methods in a 2.45 GHz ECR source
Authors:
- 1 February 2002
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 73 (2) , 542-544
Abstract
Multicharged Si and Fe ions are produced from solid materials in a 2.45 GHz electron cyclotron resonance (ECR) ion source. The ECR plasma is confined in a magnetic mirror field superimposed on an octupole magnetic field. Ar gas is normally chosen for working gas at pressures of to Si and Fe ions are produced by sputtering and evaporating solid materials, which are safe and easy to handle. The Fe (or Si) target is mounted at the tip of an insulated holder and inserted into the plasma. The negative dc bias voltages are applied to the target and multicharged Fe (or Si) ions are produced. Fe filament is evaporated in the ECR plasma by direct ohmic heating, and multicharged Fe ions are produced. Multicharged ions up to are produced by using both methods of sputtering and evaporating and by using the sputtering method. The maximum ratio of the Fe and Si ion currents to total Ar ion current are about 15% and 13% obtained by the sputtering method, respectively. The maximum current densities of and are and obtained by the sputtering method, respectively.
Keywords
This publication has 8 references indexed in Scilit:
- Production of 3d metal ion electron cyclotron resonance plasmas and ion beams using volatile compoundsReview of Scientific Instruments, 1998
- Plasma potential profile in a 2.45 GHz electron cyclotron resonance multicharged ion sourceReview of Scientific Instruments, 1998
- Metal ions from the volatile compounds method for the production of metal ion beamsReview of Scientific Instruments, 1998
- A silicon/iron-disilicide light-emitting diode operating at a wavelength of 1.5 μmNature, 1997
- Sputtering-assisted production of multicharged boron ions from solid material in a 2.45 GHz electron cyclotron resonance sourceReview of Scientific Instruments, 1996
- Modelling for Production of Multicharged Ions in ECR SourceJournal of the Physical Society of Japan, 1993
- Metal ion production in ECRIS (invited)Review of Scientific Instruments, 1992
- Strong Ion Source for Ions from SolidsReview of Scientific Instruments, 1966