Cleaning and Conditioning of Contaminated Core Build-Up Material before Adhesive Bonding
Open Access
Abstract
The objective of this study was to evaluate the effects of different cleaning and conditioning procedures after contamination on the tensile bond strength (TBS) of a luting resin to a core build-up composite resin. Specimens (n = 384) made of a core build-up material were stored for 3 weeks in 37 °C water. Half of the specimens were contaminated with saliva and a disclosing silicone and then cleaned either using phosphoric acid, a pumice suspension, air-abrasion with alumina or polishing powder. Surface conditioning was performed by either using a dentin adhesive, a silane containing primer or a composite resin primer, which resulted in 24 unique combinations of 16 specimens per group. Before measuring TBS, half of the specimens of each group were stored in 37 °C water for 3d or were artificially aged for 150 days. Results show that cleaning with pumice or air-abrasion are superior methods compared to using a polishing powder or phosphoric acid. Silane is an inferior conditioning agent compared to composite or dentin primers. Ideally, after contamination, bonding surfaces should be cleaned with a pumice suspension and conditioned with a dentin adhesive. Those surfaces could also be cleaned and conditioned with air-abrasion with alumina particles and a composite resin primer.Keywords
This publication has 48 references indexed in Scilit:
- Influence of surface conditioning and cleaning methods on resin bonding to zirconia ceramicDental Materials, 2011
- Influence of contamination on resin bond strength to nano‐structured alumina‐coated zirconia ceramicEuropean Journal of Oral Sciences, 2010
- Hydrofluoric acid on dentin should be avoidedDental Materials, 2010
- Influence of contamination and cleaning on bond strength to modified zirconiaDental Materials, 2009
- Bonding effectiveness of adhesive luting agents to enamel and dentinDental Materials, 2007
- Influence of contamination on bonding to zirconia ceramicJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2006
- Influence of metal cleaning methods on the resin bond strength to NiCr alloyDental Materials, 2005
- Influence of prolonged thermal cycling and water storage on the tensile bond strength of composite to NiCr alloyDental Materials, 1994
- Influence of Water Exposure on the Tensile Strength of CompositesJournal of Dental Research, 1990
- Composition of Dental Resin and Composite MaterialsActa Odontologica Scandinavica, 1981