EFFECT OF TEMPERING ON SUBSEQUENT DRYING OF PADDY USING FLUIDISATION TECHNIQUE
Authors:
- Nattapol Poomsa-AdNPNattapol Poomsa-Ad
- Somchart SoponronnaritSSSomchart Soponronnarit
- Somkiat PrachayawarakornSPSomkiat Prachayawarakorn
- Apichit TerdyothinATApichit Terdyothin
- 1 November 2002
- journal article
- Published by Taylor & Francis in Drying Technology
- Vol. 20 (1) , 195-210
Abstract
Drying and tempering models for paddy drying by a fluidised bed technique have been developed to describe the moisture movement inside a single paddy kernel. The grain shape was considered as a finite cylinder. The internal diffusion is an important contribution to control the drying rate of paddy. The dependence of effective diffusion coefficient on drying temperature can be adequately explained based on Arrhenius form. The parameters of this equation were evaluated in the range of temperatures between 110°C and 170°C by using the regression analysis with 189 experimental drying data. As compared with no tempering, the faster drying rate can be obtained by tempering treatment between drying stages. The effect of degrees of tempering on determining the moisture reduction in the second stage has also been explored. According to the simulation results, a prediction equation of the required tempering time for the tempering index of 0.95 has been established in which the drying air temperature, initi...Keywords
This publication has 10 references indexed in Scilit:
- Effects of drying conditions on head rice yield and browning index of parboiled riceJournal of Food Engineering, 2001
- Mass transfer during infrared drying of cashew kernelJournal of Food Engineering, 2001
- DRYING SIMULATION OF CORN WITH TEMPERINGDrying Technology, 1999
- MANAGING MOIST PADDY BY DRYING, TEMPERING AND AMBIENT AIR VENTILATIONDrying Technology, 1999
- Analysis of moisture profiles, mass Biot number and driving forces during drying of potato slabsJournal of Food Engineering, 1998
- Cross-Flow Fluidized Bed Paddy Dryer: Prototype and CommercializationDrying Technology, 1995
- AN OPTIMIZATION OF INTERMITTENT CORN DRYING IN A LABORATORY SCALE THIN LAYER DRYERDrying Technology, 1991
- DRYING OF CARROTS. I. DRYING MODELS.Drying Technology, 1989
- Theoretical and Practical Aspects of Rough Rice TemperingTransactions of the ASAE, 1980
- Influence of Tempering Time and Cooling on Rice Milling Yields and Moisture RemovalTransactions of the ASAE, 1979