In-Plane Vibration Modes of Arbitrarily Thick Disks
Authors:
- 1 April 1998
- journal article
- Published by ASME International in Journal of Vibration and Acoustics
- Vol. 120 (2) , 384-391
Abstract
The three-dimensional vibration of an arbitrarily thick annular disk is investigated for two classes of boundary conditions: all surfaces traction-free, and all free except for the clamped inner radius. These two models represent limiting cases of such common engineering components as automotive and aircraft disk brakes, for which existing models focus on out-of-plane bending vibration. For a disk of significant thickness, vibration modes in which motion occurs within the disk’s equilibrium plane can play a substantial role in-setting its dynamic response. Laboratory experiments demonstrate that in-plane modes exist at frequencies comparable to those of out-of-plane bending even for thickness-to-diameter ratios as small as 10−1. The equations for three-dimensional motion are discretized through the Ritz technique, yielding natural frequencies and mode shapes for coupled axial, radial, and circumferential deformations. This treatment is applicable to “disks” of arbitrary dimension, and encompasses classical models for plates, bars, cylinders, rings, and shells. The solutions so obtained converge in the limiting cases to the values expected from the classical theories, and to ones that account for shear deformation and rotary inertia. The three-dimensional model demonstrates that for geometries within the technologically-important range, the natural frequencies of certain in- and out-of-plane modes can be close to one another, or even identically repeated.Keywords
This publication has 17 references indexed in Scilit:
- Free Vibrations of Thick Hollow Circular Cylinders From Three-Dimensional AnalysisJournal of Vibration and Acoustics, 1997
- Accurate vibration frequencies of circular cylinders from three-dimensional analysisThe Journal of the Acoustical Society of America, 1995
- Comparisons of vibration frequencies for rods and beams from one-dimensional and three-dimensional analysesThe Journal of the Acoustical Society of America, 1995
- Vibration of Stress-Free Hollow Cylinders of Arbitrary Cross SectionJournal of Applied Mechanics, 1995
- Free Vibration Studies on Stress-Free Three-Dimensional Elastic SolidsJournal of Applied Mechanics, 1995
- Thickness Expansions for Higher-Order Effects in Vibrating Cylindrical ShellsJournal of Applied Mechanics, 1993
- Vibrations of annular plates including the effects of rotatory inertia and transverse shear deformationJournal of Sound and Vibration, 1975
- The Shear Coefficient in Timoshenko’s Beam TheoryJournal of Applied Mechanics, 1966
- Three-Dimensional Investigation of the Propagation of Waves in Hollow Circular Cylinders. II. Numerical ResultsThe Journal of the Acoustical Society of America, 1959
- Exact Analysis of the Plane-Strain Vibrations of Thick-Walled Hollow CylindersThe Journal of the Acoustical Society of America, 1958