A batch microfabrication of a microfluidic electrochemical sensor for rapid chemical oxygen demand measurement
- 11 January 2021
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in The Analyst
- Vol. 146 (6) , 1956-1964
Abstract
Chemical oxygen demand (COD) is one of the key water quality parameters in environmental monitoring. However, fabricating a COD sensor with the characteristic of batch-processing and rapid measurement is always a challenging issue. This paper reports a microfluidic electrochemical sensor for the organic matter measurement based on advanced oxidization within a fixed microvolume detection chamber by a microfabrication technique/MEMS. By fabricating a silicon-based Ag/AgCl reference electrode and employing PbO2 as the working electrode with Pt as the counter electrode, we verified the superiority of the as-fabricated sensor by continuous potassium acid phthalate detection; an acceptable limit of detection (4.17 mg L−1–200 mg L−1), a low limit of detection (2.05 mg L−1), a desirable linearity (R2 = 0.982) and relative stability at different pH values and Cl− concentrations was witnessed. Particularly, a shorter detection time (2 s) was witnessed for the as-proposed sensor compared with traditional organic matter measurement methods. Each sensing process takes only 2 seconds for sensing because a micro-cavity with a volume of 2.5 μL was fabricated and used as a detection pool. Moreover, as the sensor was fabricated by a mass-production technique, potential response consistency of multiple sensors was expected and was verified via a series of parallel experiments. In this paper, a miniaturized (8 mm × 10 mm), low-cost and reliable COD sensor was designed and fabricated by MEMS, and it provided a core sensor component for construction of an online water environment monitoring network to meet the substantial demand for COD sensors in the Internet of Things (IOT) era.Keywords
Funding Information
- National Natural Science Foundation of China (61871243)
- Natural Science Foundation of Zhejiang Province (LGF18F010004)
This publication has 19 references indexed in Scilit:
- Low cost chemical oxygen demand sensor based on electrodeposited nano-copper filmArabian Journal of Chemistry, 2018
- Determination of chemical oxygen demand (COD) using an alternative wet chemical method free of mercury and dichromateWater Research, 2017
- Chemical oxygen demand: Historical perspectives and future challengesAnalytica Chimica Acta, 2017
- Visible light photoelectrochemical properties of a hydrogenated TiO2 nanorod film and its application in the detection of chemical oxygen demandRSC Advances, 2015
- Sensors and biosensors for monitoring marine contaminantsTrends in Environmental Analytical Chemistry, 2015
- Photoelectro‐Synergistic Catalysis at Ti/TiO2/PbO2 Electrode and Its Application on Determination of Chemical Oxygen DemandElectroanalysis, 2006
- pH Effect on the uranium adsorption from seawater by a macroporous fibrous polymeric material containing amidoxime chelating functional groupReactive and Functional Polymers, 2005
- Evaluation of chemical oxygen demand (COD) based on coulometric determination of electrochemical oxygen demand (EOD) using a surface oxidized copper electrodeAnalytica Chimica Acta, 1999
- A solid composite electrode for the determination of the electrochemical oxygen demand of aqueous samplesAnalytical and Bioanalytical Chemistry, 1996
- The lead dioxide electrodeJournal of Applied Electrochemistry, 1986