Contribution of End-Winding Proximity Losses to Temperature Variation in Electromagnetic Devices
Authors:
- 2 May 2011
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 59 (2) , 848-857
Abstract
This paper presents an investigation into proximity losses in end-windings informed from 3-D finite-element analysis of an ac power inductor. The proximity effect in winding conductors is a result of circulating ac currents caused by magnetic fields generated by nearby conductors. The calculated results confirm that the effects within the end-winding while significant are lower compared to those with the active length of the conductors. The common approach of predicting proximity losses using 2-D field analyses accounts for active length of the conductors only, and therefore, an end-winding correction factor is needed to obtain a more accurate estimate of loss. The theoretical prediction of losses within the inductor has been validated experimentally on a prototype inductor. A simple method to account for the interdependence of ac loss and temperature is presented and is shown to differ significantly from the well-known dc variation of resistance with temperature.Keywords
This publication has 27 references indexed in Scilit:
- Investigation of end-winding proximity losses in electromagnetic devices2010
- High-Frequency Proximity Losses Determination for Rectangular Cross-Section ConductorsIEEE Transactions on Magnetics, 2007
- Frequency-dependent resistance in Litz-wire planar windings for domestic induction heating appliancesIEEE Transactions on Power Electronics, 2006
- A High-Efficiency Magnetic Component With Superior Caloric Performance for Low-Profile High-Density Power ConversionIEEE Transactions on Industry Applications, 2004
- Analytical method for generalization of numerically optimized inductor winding shapes2003
- The influence of air gap size and winding position on the proximity losses in high frequency transformers2002
- Two-dimensional calculation of winding losses in transformers2002
- Computationally efficient winding loss calculation with multiple windings, arbitrary waveforms, and two-dimensional or three-dimensional field geometryIEEE Transactions on Power Electronics, 2001
- Optimal choice for number of strands in a litz-wire transformer windingIEEE Transactions on Power Electronics, 1999
- Proximity losses computation with a 2D complex permeability modellingIEEE Transactions on Magnetics, 1998