Numerical study on the atomization performance of aviation biofuel with high blending ratio
Open Access
- 6 May 2025
- journal article
- research article
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 20 (5) , e0321880
Abstract
Blending aviation biofuel with conventional jet fuel helps reduce carbon emissions in aviation. However, high blending ratios (≥50%) can impact engine atomization performance. This study uses a three-dimensional simulation of gas-liquid flow in a centrifugal nozzle with the volume of fluid (VOF) method to evaluate the atomization performance of aviation biofuels with traditional jet fuel at different blending ratios (0%, 40%, 60%, 80%, 100%), under varying temperatures and nozzle inlet pressures. The simulation results align well with empirical data, showing deviations of less than 10%. As the inlet pressure increases from 0.2 MPa to 1.0 MPa, the nozzle outlet velocity increases by 127.0%, and the liquid film thickness decreases by 41.8%, improving atomization performance. At 0.2 MPa, higher blending ratios (≥50%) leads to thicker liquid films, reducing atomization efficiency. However, at 1.0 MPa, the effect of blending ratio on atomization becomes less significant, with the difference in liquid film thickness reduced to 4.2%. Fuel temperature significantly affects atomization, with more noticeable differences between low- and high-blending fuels. As temperature rises from 0°C to 50°C, liquid film thickness decreases, with a reduction of 14.6% for low-blending fuel and 52.8% for high-blending fuel.Keywords
Funding Information
- the Fundamental Research Funds for the Central Universities (KJZ53420240003)
- China Scholarship Council (202307310002)
This publication has 36 references indexed in Scilit:
- A surrogate fuel emulating the physical and chemical properties of aviation biofuelsBiofuels, Bioproducts and Biorefining, 2024
- Evaluation of spray characteristics of aviation biofuels and Jet A-1 from a hybrid airblast atomizerExperimental Thermal and Fluid Science, 2022
- Modelling spray performance of alternative aviation fuelEnergy, 2021
- Properties effect of blending fischer-tropsch aviation fuel on spray performancesEnergy, 2019
- Experimental study of diesel fuel atomization performance of air blast atomizerExperimental Thermal and Fluid Science, 2018
- Flow characteristics of liquid nitrogen through solid-cone pressure swirl nozzlesApplied Thermal Engineering, 2017
- An experimental study on jatropha-derived alternative aviation fuel sprays from simplex swirl atomizerFuel, 2016
- Influence of fuel temperature on atomization parameters in a pressure-swirl atomizer from a port fuel injector by Shadowgraphy techniqueJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2015
- Experimental investigation of spray characteristics of alternative aviation fuelsEnergy Conversion and Management, 2014
- Effect of viscosities on structure and instability of sprays from a swirl atomizerExperimental Thermal and Fluid Science, 2012