Effects of Various Steam Flooding Injection Patterns and Steam Quality to Recovery Factor
Authors:
Open Access
- 30 April 2019
- journal article
- Published by UIR Press in Journal of Earth Energy Engineering
- Vol. 8 (1) , 33-39
Abstract
The main principle of steam flooding is to reduce the oil viscosity using hot steam that is injected into the reservoir. In the field implementation there are several injection patterns that can be applied for steam flooding. This research aims to determine the effect of several injection patterns and steam quality on oil recovery factor. Therefore, it can be known the injection pattern and steam quality are right to obtain the best recovery factor. Analysis was carried out on injection patterns including five-spots, inverted five-spots, seven-spots, inverted seven-spots, nine-spots, and inverted nine-spots. The variations in the steam quality used are 50%, 70% and 90%. The simulation model a 3-dimensional cartesian with grid block size 5x5x5 on CMG STARS. The parameters in this steam flooding scenario are temperature at 450° F, injection pressure of 500 psi, and injection rate of 1000 bbl /day. Of all the scenarios tested the best results were in the inverted seven spot pattern with steam quality 0.9, where recovery factor was 35,1% and total cumulative production was 269397 bbl.Keywords
This publication has 9 references indexed in Scilit:
- Spontaneous Imbibition Test of Low Salinity Injection at Low Saline Waxy Crude CarbonateJournal of Earth Energy Engineering, 2018
- A Prospective Method to Increase Oil Recovery in Waxy-Shallow ReservoirIOP Conference Series: Materials Science and Engineering, 2018
- Optimasi Laju Injeksi Pada Sumur Kandidat Convert to Injection (CTI) di Area X Lapangan YJournal of Earth Energy Engineering, 2017
- Analysis of Petroleum Downstream Industry Potential in Riau ProvinceJournal of Geoscience, Engineering, Environment, and Technology, 2017
- Simulation on Heavy Oil Production from Steam-FloodingMATEC Web of Conferences, 2016
- Understanding the Key Parameters in Optimization of Steamfloods in Heavy Oil Fields with Application on SPE Comparative Solution Project2013
- Revitalizing Indonesia's Potential for Oil Production: The Study of Electromagnetically Heated Gravel Packs for Steam-produced Heavy Oil Reservoirs2013
- Optimal Choice of Completion Intervals for Injectors and Producers in Steamfloods1993
- Evaluation of Steam-Injection Designs for the Duri Steamflood Project1991