Abstract
The use of geometrical attributes is becoming common place in modern interpretation, however in many cases the origin and actual use of these attributes is unclear. In the case of curvature there is a lack of understanding of the difference between maximum and minumum curvature and most positive and most negative curvature. A careful examination of the derivation of these two seperate sets of attibutes reveals that what are called the most positive and most megative curvatures are in general not curvature measures, but measures of the second derivative. They are found to be the eigenvalues of the Hessian matrix. Only in the special case of zero dip, when the first derivative is zero, do these second derivative measures give the curvature,at which they are equal to the maximum and minimum curvature. It is also important to recognize that while maximum and minimum curvature are orthogonal in R3, their projections on the x‐y plane, are not necessarily orthogonal. Therefore, the angle between the azimuths of maximum and minimum curvature are not necessarily ninety degrees, as is commonly stated. The derivation presented here also corrects previous misrepresentations of the equation of curvature azimuth under a quadratic approximation. Through these observations it becomes apparent that in many cases the curvature attributes may be misused and that the potential exists for a more robust use of curvature azimuths with a better understanding of their meaning. A simple example of curvature as measured at varying azimuths for a series of 3D surveys demonstrates one possible application.