Online tuning method for notch filter depth in industrial servo systems
Authors:
- 29 August 2016
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 9514-9518
Abstract
This paper presents an online tuning method for notch filter depths in industrial servo systems. Notch filters are commonly utilized to suppress resonances in servo systems. Using a damping ratio of notch-filter zeros is especially important when the resonance has a damped behavior. This paper develops an online tuning method to adjust the damping ratio of notch-filter zeros, by adjusting the depth parameter of a bi-quad notch filter. The developed tuning method uses the electrical current command of a servo system as an input to detect a resonance. When a resonance occurs, the tuning method increases the depth parameter to decrease the damping ratio of notch-filter zeros, and then the tuning method checks whether the resonance is suppressed. If the resonance is not suppressed and the depth parameter has not reached the upper limit, the tuning method repeats the process of increasing the depth parameter. After several iterations, an appropriate depth parameter is selected and the resonance can be suppressed. Experiments are performed using two servo systems which are coupled with a ball-screw-drive load and a belt-drive load, respectively. The resonance of the belt-drive load has a behavior that is more highly damped behavior than that of the ball-screw-drive load. Experimental results show that the resonances of both systems are successfully suppressed using the developed tuning method.Keywords
This publication has 12 references indexed in Scilit:
- Discrete-derivative method for adaptive-notch-filter based frequency estimators2015
- Application of adaptive notch filter for resonance suppression in industrial servo systems2014
- An adaptive notch filter for narrow band interference removal2013
- Speed Control for PMSM Servo System Using Predictive Functional Control and Extended State ObserverIEEE Transactions on Industrial Electronics, 2011
- Sliding-Mode-Observer-Based Adaptive Control for Servo Actuator With FrictionIEEE Industrial Electronics Magazine, 2007
- Mechanical resonance damping in an industrial servo drive2007
- An Adaptive Notch Filter for Frequency Estimation of a Periodic SignalIEEE Transactions on Automatic Control, 2004
- Notch filter tuning for resonant frequency reduction in dual inertia systems2003
- Resonant load control methods for industrial servo drives2002
- Direct torsion control of flexible shaft in an observer-based discrete-time sliding modeIEEE Transactions on Industrial Electronics, 1998