Transition Metal Catalysts for Boron Combustion
- 28 November 2019
- journal article
- research article
- Published by Taylor & Francis in Combustion Science and Technology
- Vol. 193 (8) , 1400-1424
Abstract
Composite powders comprising 95 wt% boron and 5 wt% metal additives including Fe, Co, Ni, Hf, and Zr, were prepared by high energy mechanical milling in a planetary mill using hexane as a process control agent (PCA). Additionally, composites with Fe were prepared using acetonitrile and stearic acid as PCA. Single particles of boron and all prepared materials were fed into the combustion products of a pre-mixed air-acetylene flame, in a diffusion air-hydrogen flame, and ignited in air using a CO2 laser beam. Infrared emission pulses of burning particles were recorded. Distribution of burn times for each powder was obtained based on the durations of these pulses. Correlating the time distributions with measured particle size distributions yielded trends showing the effect of particle size on its burn time for all materials. Color temperatures were also recovered from the recorded emission signals. Additionally, constant volume explosion experiments were performed with all materials aerosolized in air. Results show that the morphology of the prepared composite powders is similar to that of boron. Single particle combustion experiments show that adding Hf leads to the most significant acceleration of combustion compared to boron. A positive effect of Hf as an additive is noted in different oxidizing environments. Adding Fe leads to an improved burn rate in air; however, there is no clear advantage in other oxidizing environments. No clear improvement is observed when other metal additives are used. Preparing B-Fe composites using different PCAs suggests that both a greater refinement of iron and a stronger acceleration in the burn rates of the prepared powders particles in air occur when acetonitrile and stearic acid are used as PCA. The results of the present cloud combustion experiments were found to be affected by multiple parameters and processes making it difficult to offer their meaningful interpretation.Keywords
Funding Information
- Defense Threat Reduction Agency (HDTRA1-15-1-0024)
- Office of Naval Research (N00014-19-1-2048)
This publication has 32 references indexed in Scilit:
- Effects of Ti and Mg particles on combustion characteristics of boron–HTPB-based solid fuels for hybrid gas generator in ducted rocket applicationsActa Astronautica, 2019
- Boron doped with iron: Preparation and combustion in airCombustion and Flame, 2019
- Combustion of boron and boron–iron composite particles in different oxidizersCombustion and Flame, 2018
- Oxidation kinetics and combustion of boron particles with modified surfaceCombustion and Flame, 2016
- Combustion of boron particles in products of an air–acetylene flameCombustion and Flame, 2016
- Combustion of fine aluminum and magnesium powders in waterCombustion and Flame, 2013
- Effects of volatile coatings and coating removal mechanisms on the morphology of graphitic sootCarbon, 2013
- Aluminum particle combustion in turbulent flamesCombustion and Flame, 2013
- Magnesium boride sintered as high-energy fuelJournal of Thermal Analysis and Calorimetry, 2012
- Emission spectroscopy of flame fronts in aluminum suspensionsProceedings of the Combustion Institute, 2007