Comparison study: The effect of unmodified and modified graphene nano‐platelets (GNP) on the mechanical, thermal, and electrical performance of different types of GNP‐filled materials
Authors:
- 7 May 2021
- journal article
- research article
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 32 (9) , 3588-3608
Abstract
Graphene nano‐platelet (GNP) nano‐fillers were successfully covalently functionalized with carboxylic and epoxide groups as proven by Fourier‐transform infrared spectroscopy. This paper reports the effect of unmodified and modified GNP nano‐fillers on the mechanical, thermal, and electrical performance of GNP‐filled materials. The results show that the mechanical properties of GNP‐filled materials were enhanced with a modified GNP nano‐filler. Among the GNP‐filled materials, the modified epoxy/NR/GNP compatibilized material shows higher flexural and toughness properties. The modified GNP nano‐filler has reduced the thermal stability of the modified compatibilized material. This is because the oxygen‐containing groups (C–O–C and –COOH) on the surfaces of modified GNP nano‐fillers have lower thermal stability; which accelerates the thermal decomposition of the modified material. Modified compatibilized material shows higher electrical conductivity than the unmodified compatibilized material. X‐ray diffraction results proved that d‐spacing of modified GNP nano‐fillers in modified compatibilized material was shortest when compared to unmodified GNP nano‐fillers in unmodified compatibilized material, thus, allowing more electrons to travel at a faster rate through the conductive pathways.Keywords
This publication has 58 references indexed in Scilit:
- A Green Approach to the Synthesis of Graphene NanosheetsACS Nano, 2009
- A Graphene Hybrid Material Covalently Functionalized with Porphyrin: Synthesis and Optical Limiting PropertyAdvanced Materials, 2009
- Non-covalent functionalization of graphene sheets by sulfonated polyanilineChemical Communications, 2009
- Flexible Graphene Films via the Filtration of Water-Soluble Noncovalent Functionalized Graphene SheetsJournal of the American Chemical Society, 2008
- Thermogravimetric analysis of PVC/ELNR blendsPolymer Degradation and Stability, 2007
- Effect of carboxyl-terminated poly(butadiene-co-acrylonitrile) (CTBN) concentration on thermal and mechanical properties of binary blends of diglycidyl ether of bisphenol-A (DGEBA) epoxy resinMaterials Science and Engineering: A, 2007
- Mechanical properties of epoxy-based composites using nanoclaysComposite Structures, 2006
- Solution Properties of Graphite and GrapheneJournal of the American Chemical Society, 2006
- Surface groups on nitric acid oxidized carbon black samples determined by chemical and thermodesorption analysesCarbon, 1991
- Degradation of epoxy polymers: Part 4—Thermal degradation of bisphenol-A diglycidyl ether cured with ethylene diaminePolymer Degradation and Stability, 1986