Enhanced energy performance from core–shell structured Al@Fe 2 O 3 nanothermite fabricated by atomic layer deposition
Authors:
Open Access
- 23 January 2017
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (12) , 7188-7197
Abstract
The energy performances of nanothermite materials are dependent on the mass transport, diffusion distance, and interfacial contact area between the fuel and the oxidizer. In this work, we utilize an atomic layer deposition (ALD) technique to deposit Fe2O3 directly onto the surface of Al nanoparticles, producing a core–shell structured nanocomposite (Al@Fe2O3). Quartz crystal microbalance measurement and mass gain analysis reveal that the average Fe2O3 film growth rate is 0.12–0.13 nm per cycle. The thickness of the Fe2O3 layer deposited on the Al nanopowder can be precisely controlled by adjusting the number of ALD cycles. Structural characterization results demonstrate complete encapsulation of Al nanoparticles by conformal γ-Fe2O3 layers and confirm the formation of core–shell nanocomposites. The energy release and combustion properties of the nanothermites are investigated by differential scanning calorimetry and laser ignition tests. Compared to mechanically mixed Al–Fe2O3 nanopowders, the Al@Fe2O3 nanothermite has a lower onset temperature and a higher energy output. Besides, the thermite reaction of Al@Fe2O3 is several times faster than that of a mixture of Al–Fe2O3 nanopowders. The improved energy performance is mostly attributed to the uniform distribution of Al and Fe2O3 on the nanometer scale, which effectively reduces the diffusion distance and maximizes the interfacial contact area between the oxidizer and the fuel.Keywords
This publication has 53 references indexed in Scilit:
- Modulation of the Reactivity of a WO3/Al Energetic Material with Graphitized Carbon Black as AdditiveJournal of Energetic Materials, 2015
- Nanostructured Energetic Composites: Synthesis, Ignition/Combustion Modeling, and ApplicationsACS Applied Materials & Interfaces, 2014
- Reaction kinetics of nanometric aluminum and iodine pentoxideJournal of Thermal Analysis and Calorimetry, 2010
- Metal-based reactive nanomaterialsProgress in Energy and Combustion Science, 2009
- Simulation ofcombustion: Sensitivity analysisChemical Engineering Science, 2007
- Nanoenergetic Materials for MEMS: A ReviewJournal of Microelectromechanical Systems, 2007
- The effect of slow heating rates on the reaction mechanisms of nano and micron composite thermite reactionsJournal of Thermal Analysis and Calorimetry, 2006
- Dependence of size and size distribution on reactivity of aluminum nanoparticles in reactions with oxygen and MoO3Thermochimica Acta, 2006
- Fuel—Oxidant Particle Contact in Binary Pyrotechnic ReactionsPropellants, Explosives, Pyrotechnics, 1998
- Thermite reactions: their utilization in the synthesis and processing of materialsJournal of Materials Science, 1993