Self‐smoothing lithium metal anode based on screen‐printed Cu‐mesh current collector for long‐term safety of lithium metal batteries
Authors:
Open Access
Abstract
Lithium metal is an attractive anode candidate to enable high‐energy lithium battery systems. However, nonideal dendrite growth at the anode/separator interface hinders the safe application of lithium metal batteries (LMBs). Three‐dimensional (3D) current collectors (CCs) with high specific surface area could afford a crucial effect on suppressing dendrites, yet still subject to large thickness/weight and limited scalability for large‐area fabrication. Here, we show an industry‐compatible screen‐printing technique to prepare ultrathin (∼1.5 μm) and ultralight (∼0.54 mg cm −2 ) Cu mesh on commercial Cu foil to realize a long‐term safety of LMBs. In contrast to conventional laboratory level techniques, the screen‐printed Cu‐mesh CCs (∼8.3 mg cm −2 ), which are even lighter than the original Cu foil (∼8.84 mg cm −2 ), show a high compatibility for large‐area fabrication. Meanwhile, the periodic Cu mesh can be also used to regulate the homogeneous distribution of Li‐ion flux and thus, be in favor of realizing self‐smoothing anodes at even deep and fast plating/stripping of lithium. The resulting lithium anodes demonstrate a long‐term cyclic life of ∼840 h at 1 mA cm −2 with a high Coulombic efficiency of 97.5%. LMBs with Cu‐mesh CCs exhibit outstanding capacity retentions of ∼87% after 350 cycles at 1 C and ∼80% after 200 cycles at 5 C, suggesting a significant step of printable 3D CCs toward practical application of high‐energy LMBs.Keywords
Funding Information
- National Key Research and Development Program of China (2023YFB3608904)
- Natural Science Foundation of Jiangsu Province (BE2019120)
- Natural Science Foundation of Jiangsu Province (BK20221332)
- Jiangsu Planned Projects for Postdoctoral Research Funds (2019K202)
This publication has 31 references indexed in Scilit:
- A Silica‐Reinforced Composite Electrolyte with Greatly Enhanced Interfacial Lithium‐Ion Transfer Kinetics for High‐Performance Lithium Metal BatteriesAdvanced Materials, 2022
- Lithium‐Diffusion Induced Capacity Losses in Lithium‐Based BatteriesAdvanced Materials, 2022
- An Antipulverization and High‐Continuity Lithium Metal Anode for High‐Energy Lithium BatteriesAdvanced Materials, 2021
- Lithium Induced Nano‐Sized Copper with Exposed Lithiophilic Surfaces to Achieve Dense Lithium Deposition for Lithium Metal AnodeAdvanced Functional Materials, 2020
- Regulating Lithium Nucleation and Deposition via MOF‐Derived Co@C‐Modified Carbon Cloth for Stable Li Metal AnodeAdvanced Functional Materials, 2020
- Plasma‐Strengthened Lithiophilicity of Copper Oxide Nanosheet–Decorated Cu Foil for Stable Lithium Metal AnodeAdvanced Science, 2019
- Dendrite‐Free Lithium Anodes with Ultra‐Deep Stripping and Plating Properties Based on Vertically Oriented Lithium–Copper–Lithium ArraysAdvanced Materials, 2019
- Vertically Aligned Lithiophilic CuO Nanosheets on a Cu Collector to Stabilize Lithium Deposition for Lithium Metal BatteriesAdvanced Energy Materials, 2018
- Stable Li Metal Anodes via Regulating Lithium Plating/Stripping in Vertically Aligned MicrochannelsAdvanced Materials, 2017
- Prestoring Lithium into Stable 3D Nickel Foam Host as Dendrite‐Free Lithium Metal AnodeAdvanced Functional Materials, 2017