Effect of short carbon fiber surface treatment on composite properties
- 20 December 2010
- journal article
- other
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 45 (18) , 1885-1891
Abstract
The effects of whiskerized carbon fibers (WCF) embedded as filler into polymer matrix were investigated. In this respect, composites consisting of pure polypropylene and also carbon fiber (CF)/polypropylene (PP) was fabricated and compared. Polypropylene matrix was reinforced with 2% concentration of WCF and prepared by a melt-mixing method. The tensile test indicated that the addition of 2% WCF enhanced the tensile strength and Young’s modulus by 38.1% and 28.2%, respectively. Besides that, the elongation was decreased for that sample. Dynamic mechanical analysis showed an increase of 39.2% in the stiffness of the WCF/PP composite and an improvement in the storage modulus. The tan δ for the sample was also smaller than unfilled PP and CF/PP composites. Furthermore, thermogravimetric analyses in an inert atmosphere showed a shift of temperature to the higher temperature with the addition of fillers.Keywords
This publication has 36 references indexed in Scilit:
- The Tribological Properties of Polypropylene Composite Filled with DBD-Treated Carbon FiberPolymer-Plastics Technology and Engineering, 2010
- Hierarchical composites of carbon nanotubes on carbon fiber: Influence of growth condition on fiber tensile propertiesComposites Science and Technology, 2009
- Process Parameter Interaction Effects during Carbon Nanotube Synthesis in Fluidized BedsIndustrial & Engineering Chemistry Research, 2008
- Development of Short-Carbon-Fiber-Reinforced Polypropylene Composite for Car BonnetPolymer-Plastics Technology and Engineering, 2008
- A Review of Carbon Nanotube Synthesis via Fluidized-Bed Chemical Vapor DepositionIndustrial & Engineering Chemistry Research, 2007
- Effects of filler treatments on the mechanical, flow, thermal, and morphological properties of talc and calcium carbonate filled polypropylene hybrid compositesJournal of Applied Polymer Science, 2005
- Production of carbon nanotubes in a packed bed and a fluidized bedAIChE Journal, 2003
- Carbon nanotube/carbon fiber hybrid multiscale compositesJournal of Applied Physics, 2002
- Investigation of the wear behaviour of a glass-fibre-reinforced composite and plain polyester resinComposites Science and Technology, 2002
- Modification of the surface properties of carbon fibers via the catalytic growth of carbon nanofibersJournal of Materials Research, 1995