A High-Precision CV/CC AC–DC Converter Based on Cable and Inductance Compensation Schemes
Authors:
- 1 December 2015
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 31 (9) , 6372-6382
Abstract
This paper proposes a high-precision primary-side regulation constant voltage (CV) and constant current (CC) ac–dc converter. CV output is achieved by adjusting the switching frequency and primary peak voltage simultaneously, for better dynamic adjustment ability. In order to improve CV precision, a cable compensation module is adopted to inject current to pull-down resistor of auxiliary winding divider, compensating the cable voltage loss caused by the output cable resistance. On the other hand, CC output is acquired by maintaining the ratio of switching frequency and output voltage constant. The inductance compensation module regulates further to keep the product of demagnetization time and switching frequency fixed, equalizing the inconsistent output current result from the big tolerance of the transformer primary-side inductance in the same batch. Moreover, an improved demagnetization time detector is proposed, which is beneficial to raise CC precision. The control chip is implemented based on TSMC 0.35-μm 5-V/40-V BCD process, and a 12 V/1 A prototype has been built to prove the proposed control method. In CV mode, the deviation of the output voltage is within ±1.5%, while that of output current is within ±3% in CC mode.Keywords
Funding Information
- National Natural Science Foundation of China (61376029)
This publication has 24 references indexed in Scilit:
- Transformer Coupled Recycle Snubber for High-Efficiency Offline Isolated LED Driver With On-Chip Primary-Side Power RegulationIEEE Transactions on Industrial Electronics, 2014
- Modeling and design of cable compensation for a primary side regulation (PSR) flyback converter2013
- IC design of primary-side control for flyback converter2013
- A Novel Primary-Side Regulation Scheme for Single-Stage High-Power-Factor AC–DC LED Driving CircuitIEEE Transactions on Industrial Electronics, 2012
- Elimination of an Electrolytic Capacitor in AC/DC Light-Emitting Diode (LED) Driver With High Input Power Factor and Constant Output CurrentIEEE Transactions on Power Electronics, 2012
- An Efficient Driver for Dimmable LED LightingIEEE Transactions on Power Electronics, 2012
- A High Efficiency Flyback Converter With New Active Clamp TechniqueIEEE Transactions on Power Electronics, 2010
- A Very Simple Control Strategy for Power Factor Correctors Driving High-Brightness LEDsIEEE Transactions on Power Electronics, 2009
- Flyback Converter Protection Scheme with a Selective Shutdown Delay Time2006
- Small-Signal Analysis and Control Design of Isolated Power Supplies With Optocoupler FeedbackIEEE Transactions on Power Electronics, 2005