Time-to-Digital Converter based on an On-chip Voltage Reference Locked Ring Oscillator
- 1 April 2006
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10915281,p. 250-254
Abstract
A time-to-digital converter (TDC) based on an on-chip voltage reference locked ring oscillator has been fabricated in a 0.18 mum CMOS process for a pulsed time-of-flight laser rangefinder (TOF). The ring oscillator is stabilized by measuring its frequency by a frequency-to-voltage converter (FVC) and locking its output to a stable voltage reference. The time-to-digital conversion is based on counting the pulses of this six-stage, differential ring oscillator and additionally registering the state of its 12 phases at the arrival moment of the timing signals. The measured temperature dependence of the TDC is less than 0.34% in the temperature range of 0degC to 70degC corresponding to 34 mm in the distance of 10 m. The single-shot precision standard deviation value of the TDC is less than 46 ps (7 mm) in the distance range of 0 to 12 m and the power consumption is less than 18 mWKeywords
This publication has 9 references indexed in Scilit:
- All-digital TX frequency synthesizer and discrete-time receiver for Bluetooth radio in 130-nm CMOSIEEE Journal of Solid-State Circuits, 2004
- A temperature stabilized CMOS ring oscillator for a time-to-digital converter of a laser radar2004
- A low voltage CMOS constant current-voltage reference circuit2004
- On-chip calibration technique for delay line based BIST jitter measurement2004
- Design of a 1 V low power CMOS bandgap reference based on resistive subdivision2004
- An integrated 9-channel time digitizer with 30 ps resolution2003
- 1 V CMOS current reference with 50 ppm/°C temperature coefficientElectronics Letters, 2003
- High performance integrated CMOS frequency-to-voltage converter2002
- Laser radar-based measuring systems for large scale assembly applications1993