The impact of inlet flash evaporation conditions on erosion damage characteristics of coal gasification black water angle valve and prevention strategies
Authors:
Open Access
- 1 January 2020
- journal article
- research article
- Published by EDP Sciences in Mechanics & Industry
- Vol. 21 (6) , 626
Abstract
In view of the three-stage flash evaporation system of the coal gasification plant, a combination of theoretical analysis and numerical simulation was used to establish the erosion damage evaluation model in the black water angle valve. The influence of the inlet flash evaporation ratio on the inlet velocity, the outlet flash evaporation ratio and the outlet velocity of the low-pressure black water angle valve are systematically studied, the mechanism of erosion damage to the carbon steel valve body by the solid medium in black water was analyzed according to the micro-cutting theory. The results show that the inlet velocity w 1, the outlet flash evaporation ratio x 2, the outlet velocity w 2 of angle valve have linear correlation with the inlet flash evaporation ratio x 1.The upstream volume erosion ratio of the angle valve at the inlet flash ratio x 1 = 3 wt.% is 114 times as much as that at zero inlet flash ratio. Meanwhile, the downstream volume erosion ratio of the angle valve at x 1 = 3 wt.% is only 2.7 times as much as that at zero inlet flash ratio. The prevention strategies to reduce the erosion damage to black water angle valve are proposed by inhibiting the inlet flash evaporation ratio and reducing the inlet flow rate etc. This study is expected to provide guidance for the erosion resistance design and operation of the black water angle valve.Keywords
This publication has 9 references indexed in Scilit:
- Investigation on failure process and structural improvement of a high-pressure coal water slurry valveEngineering Failure Analysis, 2019
- Numerical simulation on the erosion wear of a multiphase flow pipelineThe International Journal of Advanced Manufacturing Technology, 2017
- CFD simulation of sand particle erosion under multiphase flow conditionsWear, 2017
- Numerical simulation of solid particle erosion in pipe bends for liquid–solid flowPowder Technology, 2016
- Improved CFD modeling and validation of erosion damage due to fine sand particlesWear, 2015
- Process Development, Simulation, and Industrial Implementation of a New Coal-Gasification Wastewater Treatment Installation for Phenol and Ammonia RemovalIndustrial & Engineering Chemistry Research, 2010
- Analysis of pipe failure at the Great Plains Coal Gasification PlantMaterials Characterization, 1994
- The influence of impingement angle on the erosion of ductile metals by angular abrasive particlesWear, 1992
- On the velocity dependence of the erosion of ductile metals by solid particles at low angles of incidenceWear, 1978