Enhanced Formability of Age-Hardenable Aluminium Alloys by Incremental Forming of Solution-Treated Blanks
- 24 April 2013
- journal article
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 549, 164-171
Abstract
The influence of thermal pre-treatment on the formability of a precipitation-hardening aluminium alloy AA-2024 has been studied for three different heat treatment conditions: annealed (O-temper), solution treated and quenched (W-temper) and solution heat treated, quenched and then cold worked (T-temper).The maximum draw angle has been determined and the geometrical accuracy of specific SPIF formed parts has been compared. It is found that the maximum forming angles of the blank formed in O-temper and W-temper conditions show a respective 41% and 32% increase to those of the T-temper condition (initial blank).The hardness of the material reduces significantly after annealing, while SPIF parts formed from W-temper blanks regain their initial hardness after natural aging.Keywords
This publication has 12 references indexed in Scilit:
- In-Process Hardening in Laser Supported Incremental Sheet Metal FormingKey Engineering Materials, 2012
- Formability and failure mechanisms of AA2024 under hot forming conditionsMaterials Science and Engineering: A, 2011
- The formability of annealed and pre-aged AA-2024 sheets in single-point incremental formingThe International Journal of Advanced Manufacturing Technology, 2009
- Force prediction for single point incremental forming deduced from experimental and FEM observationsThe International Journal of Advanced Manufacturing Technology, 2009
- Process window enhancement for single point incremental forming through multi-step toolpathsCIRP Annals, 2008
- Asymmetric Single Point Incremental Forming of Sheet MetalCIRP Annals, 2005
- The effect of homogenization treatment on the hot workability between the surface and the center of AA 2014 ingotsMaterials Characterization, 2002
- The effects of SiC particle volume fraction on the microstructure and hot workability of SiCp/AA 2024 compositesJournal of Materials Processing Technology, 1999
- The effect of homogenization and precipitation treatments on the extrudability and ambient-temperature mechanical properties of aluminum alloy AA2024Materials Science and Engineering: A, 1993
- On impurity segregation on dislocations in metalsJournal de Physique III, 1993