High cycling stability and well printability poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate)/multi‐walled carbon nanotube nanocomposites via in situ polymerization applied on electrochromic display
- 31 October 2017
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 135 (10)
Abstract
A high cycling stability material and an additive manufacturing method are reported for the fabrication of solid electrochromic devices. The poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate)/multi‐walled carbon nanotube (PEDOT:PSS/MWCNT) nanocomposites were synthesized via in situ polymerization. A carboxymethyl cellulose gel was used as the ink vehicle for screen printing. The electrochromic (EC) performance of films patterned by screen printing was also examined. The results of characterization indicate that strong interfacial interactions occurred between PEDOT:PSS and the MWCNTs and the MWCNTs formed a network in these conducting polymers film, so the composite was more conductive than pure PEDOT:PSS. Devices containing PEDOT:PSS/MWCNTs were more stable after 1000 cycles, exhibited higher rate of ion exchange and faster increases in current. The composite containing 0.3 wt % MWCNTs also had a 23% higher color contrast (ΔE*) than pure PEDOT:PSS at 2.5 V applied voltages. The EC inks with well printability not only can be used to print large area films, but also can print fine lines and pixel‐type dots in displays. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 45943.Keywords
Funding Information
- Science and Technology Planning Project of Guangdong Province, China (2016070220045)
- State Key Laboratory of Pulp & Paper Engineering research project (2016c01)
This publication has 32 references indexed in Scilit:
- Electrochromism of DC magnetron sputtered TiO2 thin films: Role of deposition parametersSolar Energy Materials and Solar Cells, 2013
- Transition metal oxide films: Technology and “Smart Windows” electrochromic device performanceProgress in Organic Coatings, 2012
- Feasibility of conducting semi-IPN with variable electro-emissivity: A promising way for spacecraft thermal controlSolar Energy Materials and Solar Cells, 2012
- Multicolor electrochromic polyaniline–WO3 hybrid thin films: One-pot molecular assembling synthesisJournal of Materials Chemistry, 2011
- Structural and electrochromic properties of tungsten oxide prepared by surfactant-assisted processSolar Energy Materials and Solar Cells, 2009
- Colouration efficiency measurements in electrochromic polymers: The importance of charge densityElectrochemistry Communications, 2007
- Orange to black electrochromic behaviour in poly(2-(2-thienyl)-1H-pyrrole) thin filmsElectrochimica Acta, 2007
- High Contrast Ratio and Fast-Switching Dual Polymer Electrochromic DevicesChemistry of Materials, 1998
- Analogue calorimetry of polymer blends: poly(styrene-co-acrylonitrile) and poly(phenyl acrylate) or poly(vinyl benzoate)Polymer, 1996
- Analogue Calorimetric Studies of Blends of Poly(vinyl ester)s and PolyacrylatesMacromolecules, 1996