Sensitivity Analysis of FWI Applied to OVSP Synthetic Data for Fault Detection and Characterization in Crystalline Rocks
Open Access
- 27 October 2021
- journal article
- research article
- Published by MDPI AG in Geosciences
- Vol. 11 (11) , 442
Abstract
We have performed several sensitivity studies to assess the ability of the Full Wave Inversion method to detect, delineate and characterize faults in a crystalline geothermal reservoir from OVSP data. The distant goal is to apply the method to the Soultz-sous-Forêts site (France). Our approach consists of performing synthetic Full Wave 2D Inversion experiments using offset vertical seismic and comparing the estimated fields provided by the inversion, i.e., the estimated underground images, to the initial reference model including the fault target. We first tuned the inversion algorithmic parameters in order to adapt the FWI software, originally dedicated to a sedimentary context, to a crystalline context. In a second step, we studied the sensitivity of the FWI fault imaging results as a function of the acquisition geometry parameters, namely, the number of shots, the intershot distance, the maximum offset and also the antenna length and well deviation. From this study, we suggest rules to design the acquisition geometry in order to improve the fault detection, delineation and characterization. In a third step, we studied the sensitivity of the FWI fault imaging results as a function of the fault or the fault zone characteristics, namely, the fault dip, thickness and the contrast of physical parameters between the fault materials and the surrounding fresh rocks. We have shown that a fault with high dip, between 60 and 90° as thin as 10 m (i.e. lower than a tenth of the seismic wavelength of 120 m for Vp and 70 m for Vs) can be imaged by FWI, even in the presence of additive gaussian noise. In summary, for a crystalline geological context, and dealing with acceptable S/N ratio data, the FWI show a high potential for accurately detecting, delineating and characterizing the fault zones.Keywords
Funding Information
- MEET project (792037)
This publication has 31 references indexed in Scilit:
- 3D model of fracture zones at Soultz-sous-Forêts based on geological data, image logs, induced microseismicity and vertical seismic profilesComptes Rendus. Géoscience, 2010
- Contribution of the exploration of deep crystalline fractured reservoir of Soultz to the knowledge of enhanced geothermal systems (EGS)Comptes Rendus. Géoscience, 2010
- Structure of the low permeable naturally fractured geothermal reservoir at SoultzComptes Rendus. Géoscience, 2009
- Seismic response of the fractured and faulted granite of Soultz-sous-Forêts (France) to 5 km deep massive water injectionsGeophysical Journal International, 2009
- The domain of applicability of acoustic full-waveform inversion for marine seismic dataGeophysics, 2009
- Investigation into the use of 2D elastic waveform inversion from look-ahead walk-away VSP surveysGeophysical Prospecting, 2008
- Velocity model building by 3D frequency-domain, full-waveform inversion of wide-aperture seismic dataGeophysics, 2008
- Thermal tracking of upper crustal fluid flow in the Rhine grabenGeophysical Research Letters, 2000
- Modeling of a constant Q; methodology and algorithm for an efficient and optimally inexpensive viscoelastic techniqueGeophysics, 1995
- Vertical seismic profilingThe Leading Edge, 1985