Effects of organic peroxide and polymer chain structure on mechanical and dynamic mechanical properties of sisal fiber reinforced polyethylene composites
Authors:
- 20 January 2012
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 125 (3) , 2216-2222
Abstract
Three types of polyethylene (PE), low‐density PE (LDPE), linear low‐density PE (LLDPE), and high‐density PE (HDPE) were used as polymer matrices to prepare untreated as well as dicumyl peroxide (DCP) treated sisal fiber composites. The effect of polymer chain structure, addition of DCP, and sisal fiber loadings on the mechanical and dynamic mechanical properties of the composite was investigated in this study. It was found that the extent of improvement in tensile properties of the composite samples varied with respect to the polymer molecular characteristics. The elongation at break for all the composites decreased significantly. Young's modulus and the tensile strength of the treated LDPE and LLDPE composites increased significantly compared with the untreated composites, whereas Young's modulus of the treated HDPE samples decreased observably compared with the untreated samples. DCP treatment, however, did not change the tensile strength of HDPE and its composites. The storage modulus results for all the PE composites correlate well with the tensile testing results. In the case of the LDPE and LLDPE samples, the curves of the mechanical loss factor (tan δ) show a clear relaxation around −18°C, which shifted to higher temperature in the treated composites, whereas for HDPE this transition was not seen. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012Keywords
This publication has 28 references indexed in Scilit:
- Pretreatments of natural fibers and their application as reinforcing material in polymer composites—A reviewPolymer Engineering & Science, 2009
- Biofibres and biocompositesCarbohydrate Polymers, 2008
- Recent developments in chemical modification and characterization of natural fiber‐reinforced compositesPolymer Composites, 2007
- Chopped glass and recycled newspaper as reinforcement fibers in injection molded poly(lactic acid) (PLA) composites: A comparative studyComposites Science and Technology, 2006
- Processing, properties and stability of biodegradable composites based on Mater‐Bi® and cellulose fibresPolymers for Advanced Technologies, 2003
- Natural fibres: can they replace glass in fibre reinforced plastics?Composites Science and Technology, 2003
- Reinforcement of polypropylene using sisal fibers grafted with poly(methyl methacrylate)Journal of Applied Polymer Science, 2003
- Sisal fibre and its composites: a review of recent developmentsComposites Science and Technology, 2000
- Biofibres, biodegradable polymers and biocomposites: An overviewMacromolecular Materials and Engineering, 2000
- Composites reinforced with cellulose based fibresProgress in Polymer Science, 1999