In search of the ultimate experiment for quantitative depth profile analysis in glow discharge optical emission spectrometry. Part I: Calibration curves
Authors:
- 1 January 1995
- journal article
- research article
- Published by Wiley in Surface and Interface Analysis
- Vol. 23 (1) , 1-11
Abstract
This is the first part of our search for an experiment that will show definitively which is the best method for quantitative glow discharge optical emission spectrometry (GDOES). Three empirical methods for producing quantitative depth profiles from GDOES data are examined: the SIMR method, the IRSID method and the most recent BHP method. All three methods give worthwhile quantitative depth profiles of thin films and coated materials. The first two methods assume that pressure does not have a significant effect on emission yield, while the third method assumes that pressure is the only significant parameter affecting emission yield. The different approaches therefore imply very different physical processes inside the lamp and it is essential for further development of quantitative GDOES that the best approach be determined. Depth profiling in GDOES is, in principle, simply bulk analysis repeated over and over as a function of depth. The three methods are therefore tested here in their ability to do bulk calibration in a range of steels and zinc–aluminium alloy standards, all at constant current. All methods worked well for steel, while the best calibration curves in zinc–aluminium alloys were obtained with pressure‐corrected IRSID and SIMR methods or a voltage‐corrected BHP method. The results suggest that emission yields depend on both voltage and pressure (and presumably current, which was not tested here in Part I).Keywords
This publication has 17 references indexed in Scilit:
- Correcting for background and inter-element effects in glow discharge optical emission spectrometryJournal of Analytical Atomic Spectrometry, 1994
- Measurement of gas temperatures and metastable state densities in a microwave boosted glow discharge using a diode laserSpectrochimica Acta Part B: Atomic Spectroscopy, 1992
- Optical investigations of excitation processes responsible for ionized sputtered species in a low pressure, low current, coaxial geometry glow dischargeSpectrochimica Acta Part B: Atomic Spectroscopy, 1991
- Observations on the use of the microwave-boosted glow discharge lamp and the relevant excitation processesJournal of Analytical Atomic Spectrometry, 1989
- Surface analysis with the glow discharge lamp. State of the art and prospects for future developmentJournal of Analytical Atomic Spectrometry, 1988
- Glow discharge sputtering and excitation characteristics of brass alloysJournal of Analytical Atomic Spectrometry, 1988
- Study of emission and sputtering yields in some alloys and oxide by glow discharge optical spectrometry: Quantification of analysisSurface and Interface Analysis, 1985
- A study of the density of sputtered atoms in the plasma of the modified Grimm-type glow discharge sourceSpectrochimica Acta Part B: Atomic Spectroscopy, 1981
- Plasma models applicable to low pressure dischargesSpectrochimica Acta Part B: Atomic Spectroscopy, 1981
- Sputtering in a glow discharge for spectrochemical analysisAnalytical Chemistry, 1972