Influence of the Heat Treatment on the Microstructure and Corrosion Resistanceof Austempered Ductile Iron (ADI)

Authors:
  • HKH. Krawiec
    H. Krawiec
  • VVV. Vignal
    V. Vignal
  • JLJ. Lelito
    J. Lelito
  • AKA. Krystianiak
    A. Krystianiak
  • ETE. Tyrała
    E. Tyrała

Abstract
The influence of the hold time of the austempering heat treatment at 280°C on the microstructure and corrosion resistance in NaCl-based media of austempered ductile iron was investigated using X-ray diffraction, micro-hardness measurements, corrosion tests and surface observations. Martensite was only found in the sample which was heat treated for a short period (10 minutes). Corrosion tests revealed that this phase does not play any role in the anodic processes. Numerous small pits were observed in the α-phase which is the precursor sites in all samples (whatever the value of the hold time of the austempering heat treatment).