Strain-Ageing of Low-Alloyed Multiphase High-Strength Steels
Open Access
Abstract
The strain-aging of low alloyed, multiphase high-strength steels with strain-induced austenite to martensite transformation was studied. The influence of prestrain, aging time, and temperature dependence of the static strain aging was carried out. Ageing temperatures between 60 and 220 C and aging times from 20 to 10,000 min were investigated. The choice of steel composition allowed studying the influence of alloying elements, such as Si and Al, on the static strain aging behavior. Samples after aging were studied using light-optical microscopy, X-ray diffraction, and in-depth transmission electron microscopy (TEM). The Harper model was used to describe the precipitation mechanisms occurring during aging. The study of thin foils after aging using TEM showed the precipitation of low temperature transition carbides in the microstructure, which was observed between 60 and 5000 min. By using X-ray diffraction, it was revealed that aging at 170 C for a long time caused a slight decrease of the retained austenite volume fraction, but the C content remained constant.
Keywords
This publication has 22 references indexed in Scilit:
- Static strain ageing behaviour of dual phase steelsMaterials Science and Engineering: A, 2008
- Tempering Kinetics of the Martensitic Phase in DP SteelISIJ International, 2006
- Competition between grain boundary segregation and Cottrell atmosphere formation during static strain aging in ultra low carbon bake hardening steelsActa Materialia, 2004
- Structure–properties relationship in TRIP steels containing carbide-free bainiteCurrent Opinion in Solid State and Materials Science, 2004
- The lattice parameters of austenite and ferrite in FeC alloys as functions of carbon concentration and temperatureScripta Metallurgica et Materialia, 1993
- Influences of manganese on internal friction and carbon solubility determined by combination of infrared absorption in ferrite of low-carbon steels.ISIJ International, 1989
- The determination of foil thickness by scanning transmission electron microscopyPhysica Status Solidi (a), 1975
- The determination of dislocation densities in thin filmsPhilosophical Magazine, 1961
- Precipitation of Carbon and Nitrogen in Cold-Worked Alpha-IronPhysical Review B, 1951
- Dislocation Theory of Yielding and Strain Ageing of IronProceedings of the Physical Society. Section A, 1949