Transition from progressive to global buckling of aluminium extrusions – a numerical study
Authors:
- Ø JensenØJØ Jensen
- O S HopperstadOHO S Hopperstad
- M LangsethMLM Langseth
- 1 June 2005
- journal article
- Published by Taylor & Francis in International Journal of Crashworthiness
- Vol. 10 (6) , 609-620
Abstract
Numerical simulations using LS-DYNA were carried out in order to study the transition between progressive and global buckling of axially loaded aluminium extrusions in alloy AA6060 temper T6. A numerical model was validated against experimental tests and good agreement was found between the progressive buckling pattern in the numerical simulations and experimental tests. The numerical simulations were capable of giving a relatively accurate prediction of the collapse mode found in the experimental tests. The critical global slenderness is defined as the global slenderness, or length to width ratio (L/b), where direct global buckling or a transition from progressive to global buckling occurs. The validated numerical model was used in a parametric study where the influence on the critical global slenderness from impact velocity and material properties has been studied. The means to stabilize the response and increase the critical global slenderness has been investigated. It was found that the intro...Keywords
This publication has 9 references indexed in Scilit:
- Experimental investigations on the behaviour of short to long square aluminium tubes subjected to axial loadingInternational Journal of Impact Engineering, 2004
- Dynamic buckling of elastic–plastic square tubes under axial impact—I: stress wave propagation phenomenonInternational Journal of Impact Engineering, 2004
- Square aluminum tubes subjected to oblique loadingInternational Journal of Impact Engineering, 2003
- On dynamic buckling phenomena in axially loaded elastic–plastic cylindrical shellsInternational Journal of Non-Linear Mechanics, 2002
- Crashworthiness of aluminum extrusions subjected to oblique loading: experiments and numerical analysesInternational Journal of Mechanical Sciences, 2002
- Dynamic effects on buckling and energy absorption of cylindrical shells under axial impactThin-Walled Structures, 2001
- Inertia effects in axisymmetrically deformed cylindrical shells under axial impactInternational Journal of Impact Engineering, 2000
- Static and dynamic crushing of square aluminium extrusions with aluminium foam fillerInternational Journal of Impact Engineering, 2000
- Crashworthiness of aluminium extrusions: validation of numerical simulation, effect of mass ratio and impact velocityInternational Journal of Impact Engineering, 1999