Parametric Design and Power-Flow Analysis of Parallel Force∕Velocity Actuators
- 5 August 2008
- journal article
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 1 (1) , 011007
Abstract
In this paper we introduce a dual-input actuator, based on an epicyclic gear train, called parallel force∕velocity actuator (PFVA) designed for variable response manipulation. The focus of this work is to formulate a parametric representation for internal and external power flows, and effective inertia in this actuator. Dimensionless criteria have been developed to judge the design of a PFVA, based on the above phenomena. These criteria are then related to two fundamental dimensionless parameters of a PFVA: (i) a design parameter called the relative scale factor that describes the relative kinematic scaling between the two inputs of the PFVA and (b) an operational parameter called the velocity mixing ratio that represents the velocities of the inputs relative to each other. Some numerical examples have been considered using PFVA designs based on positive-ratio drives to convey the practical implication of our parametric models. Based on this study a set of design and operational guidelines has been suggested, which we believe will be useful to the designer in evaluating PFVA designs and operational scenarios on the basis of power-flow and effective inertias. As a representative result, it was observed that the efficiency of a PFVA decreases approximately 19% from the basic efficiency when the relative scale factor was increased approximately 6.5 times (from 4.7 to 25.27) and the velocity mixing ratio was increased 10 times (from 4.16 to 41.6).Keywords
This publication has 13 references indexed in Scilit:
- An atlas of physical human–robot interactionMechanism and Machine Theory, 2008
- Fast and "Soft-Arm" TacticsIEEE Robotics & Automation Magazine, 2004
- A New Actuation Approach for Human Friendly Robot DesignThe International Journal of Robotics Research, 2004
- A Review of Formulas for the Mechanical Efficiency Analysis of Two Degrees-of-Freedom Epicyclic Gear TrainsJournal of Mechanical Design, 2003
- New intelligent power-assist systems based on differential transmissionRobotica, 2003
- The Mechanical Efficiency of Epicyclic Gear TrainsJournal of Mechanical Design, 1993
- Fault-tolerant joint development for the Space Shuttle remote manipulator system: analysis and experimentIEEE Transactions on Robotics and Automation, 1993
- Impedance Control: An Approach to Manipulation: Part I—TheoryJournal of Dynamic Systems, Measurement, and Control, 1985
- Model Formulation of Complex Mechanisms With Multiple Inputs: Part I—GeometryJournal of Mechanical Design, 1978
- Power Flow and Loss in Differential MechanismsJournal of Mechanical Engineering Science, 1961