Study on Influencing Factors of Hydraulic Engineered Cementitious Composites Layer Bonding Performance
Open Access
Abstract
The layer bonding performance of hydraulic engineered cementitious composites (HECCs) plays an important role in their application in hydraulic buildings. This performance encompasses the bonding between layers of HECCs, as well as between HECCs and normal mortar (NM) layers. The influence of various factors on the layer bonding performance of HECCs was investigated. These factors included different pouring intervals (0 min, 20 min, 40 min, 60 min, 2.5 h, 7 days, 14 days, and 28 days), pouring directions (horizontal and vertical), degree of saturation (100%, 70%, 50%, 30%, and 0%), and surface roughness (varying sand-pour roughness). It was found that longer pouring interval times led to a decrease in the layer bonding performance, and the strength of the layer bonding fell below 50% compared to concrete without layers, with the lowest recorded strength being only 1.12 MPa. The layer’s horizontal flexural strength surpassed the vertical flexural strength, but the horizontal compressive strength fell below the vertical compressive strength. Additionally, the bonding performance of the substrate at 0% saturation was 15–20% lower compared to other saturation levels. Notably, roughness significantly enhanced the performance of HECC layers, with improvements reaching a maximum of 180–200%. Furthermore, the layer performance of HECCs and NM experienced an improvement of 20.5–37.5%.Keywords
Funding Information
- Natural Science Foundation of Hubei Province (2022CFD026, 52179122, U2040222, CKSF2023304/CL)
- National Natural Science Foundation of China (2022CFD026, 52179122, U2040222, CKSF2023304/CL)
- Basic Scientific Research Funds Programs in National Nonprofit Scientific Research Institutes (2022CFD026, 52179122, U2040222, CKSF2023304/CL)
This publication has 32 references indexed in Scilit:
- Slant shear bond strength between self compacting concrete and old concreteConstruction and Building Materials, 2017
- Evaluation of Bonding Shear Performance of Ultra-High-Performance Concrete with Increase in Delay in Formation of Cold JointsMaterials, 2016
- Effect of surface preparation and bonding agent on the concrete-to-concrete interface strengthConstruction and Building Materials, 2012
- Application of ECC for bridge deck link slabsMaterials and Structures, 2009
- Comparison of methods for evaluating bond strength between concrete substrate and repair materialsCement and Concrete Research, 2005
- On Engineered Cementitious Composites (ECC)Journal of Advanced Concrete Technology, 2003
- Tensile Strain-Hardening Behavior of Polyvinyl Alcohol Engineered Cementitious Composite (PVA-ECC)ACI Materials Journal, 2001
- Transition zone studies of new-to-old concrete with different bindersCement and Concrete Composites, 2001
- The effects of surface preparation on the fracture behavior of ECC/concrete repair systemCement and Concrete Composites, 2000
- FROM MICROMECHANICS TO STRUCTURAL ENGINEERINGDoboku Gakkai Ronbunshu, 1993