Multi-span composite beam
Authors:
- M SergeevMSM Sergeev
- V RimshinVRV Rimshin
- M LukinMLM Lukin
- N ZdralovicNZN Zdralovic
Open Access
- 1 July 2020
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 896 (1)
Abstract
The development of wooden structures tends to create systems, types, elements and types of connection that would allow you to save wood while increasing the load-bearing capacity and best take into account its physical and mechanical features. One of the priority directions is the creation of lightweight composite bent structures based on wood. The scientific novelty of the article consists in the study of multi-span continuous composite beams, the use of which is possible both in new construction and reconstruction. Composite multi-span wood-glued beams with the proposed reinforcement scheme are an experimental design and to date, their work is poorly studied. The essence of the proposed design is to strengthen the lower zones in the spans of the beam and the upper zones of the beam at the location of the support with fiberglass on an epoxy oligomer. To perform the calculations, we set a model of a beam with three spans of 1.5 m. the Load is assumed to be evenly distributed along the entire length of the beam. A comparison of the structure to assess its rationality was carried out with an unreinforced glued beam with the same design scheme. The study found that, in contrast to wooden beams, the strength of composite beams with rational reinforcement of stretched zones increases by 24-27 %, and the deformability decreases by 8-13 %. From the point of view of the work, it is proposed to use the method of vacuum infusion, which is proven, which has a positive effect on technical and economic indicators.Keywords
This publication has 30 references indexed in Scilit:
- Problems Relating to Assessment, Repair and Restoration of Wooden Roof Structures in Historic Buildings, as Exemplified by Two Case Studies in Southern PolandAdvanced Materials Research, 2013
- Strengthening of timber beams with high strength steel cordsComposites Part B: Engineering, 2011
- Study of strengthening solutions for glued-laminated wood beams of maritime pine woodConstruction and Building Materials, 2009
- Ribavirin dose reduction raises relapse rate dose‐dependently in genotype 1 patients with hepatitis C responding to pegylated interferon alpha‐2b plus ribavirinJournal of Viral Hepatitis, 2009
- RC beams shear-strengthened with FRP: Stress distributions in the FRP reinforcementConstruction and Building Materials, 2009
- Model for the mechanical stress due to the salt crystallization in porous materialsConstruction and Building Materials, 2008
- Laboratory tests of composite wood–concrete beamsConstruction and Building Materials, 2008
- Wood joints and laminated wood beams assembled by mechanically-welded wood dowelsJournal of Adhesion Science and Technology, 2007
- Advanced wood engineering: glulam beamsConstruction and Building Materials, 2005
- A three-dimensional model for bolted connections in woodCanadian Journal of Civil Engineering, 2003