Abstract
The objective of this research is to enhance the mechanical and thermal characteristics of jute fiber reinforced polymer (JFRP) composites for environmentally friendly structural uses by integrating statistical optimization methods with experimental assessment. JFRP laminates were fabricated using the hand lay-up technique by varying key design parameters such as fibre volume fraction, curing conditions, and fibre surface treatment. In accordance with ASTM recommendations, tensile, flexural, and impact tests were employed for mechanical characterization, while thermogravimetric analysis (TGA) was utilized to evaluate thermal stability. The best set of process parameters for optimizing strength and thermal stability while decreasing density and water absorption was found using a multi-objective optimization technique based on Response Surface Methodology (RSM) combined with Analysis of Variance (ANOVA). The results indicate that fibre surface treatment significantly improves interfacial bonding, leading to enhanced tensile and flexural properties. Thermal analysis reveals improved degradation temperature and stability with increasing fibre content up to an optimal level. The optimization model predicts an optimal fibre volume fraction in the range of 35–40%, achieving a balanced improvement in mechanical performance and thermal resistance with minimal weight increase. Experimental validation confirms the reliability of the developed model, with prediction errors below 5%. These findings demonstrate the potential of JFRP composites as sustainable alternatives for structural applications.

This publication has 11 references indexed in Scilit: