GENERATION AND COMPARISON OF TLS AND SFM BASED 3D MODELS OF SOLID SHAPES IN HYDROMECHANIC RESEARCH
Open Access
- 16 June 2016
- journal article
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLI-B5, 925-929
Abstract
The aim of a current study at the Institute of Hydraulic Engineering and Technical Hydromechanics at TU Dresden is to develop a new injection method for quick and economic sealing of dikes or dike bodies, based on a new synthetic material. To validate the technique, an artificial part of a sand dike was built in an experimental hall. The synthetic material was injected, which afterwards spreads in the inside of the dike. After the material was fully solidified, the surrounding sand was removed with an excavator. In this paper, two methods, which applied terrestrial laser scanning (TLS) and structure from motion (SfM) respectively, for the acquisition of a 3D point cloud of the remaining shapes are described and compared. Combining with advanced software packages, a triangulated 3D model was generated and subsequently the volume of vertical sections of the shape were calculated. As the calculation of the volume revealed differences between the TLS and the SfM 3D model, a thorough qualitative comparison of the two models will be presented as well as a detailed accuracy assessment. The main influence of the accuracy is caused by generalisation in case of gaps due to occlusions in the 3D point cloud. Therefore, improvements for the data acquisition with TLS and SfM for such kind of objects are suggested in the paper.Keywords
This publication has 10 references indexed in Scilit:
- Endoscopic-CT: learning-based photometric reconstruction for endoscopic sinus surgeryProceedings of SPIE, 2016
- Analysis of Different Methods for 3D Reconstruction of Natural Surfaces from Parallel‐Axes UAV ImagesThe Photogrammetric Record, 2015
- Accuracy constraints of terrestrial Lidar data for soil erosion measurement: Application to a Mediterranean field plotGeomorphology, 2015
- Measuring gullies by synergetic application of UAV and close range photogrammetry — A case study from Andalusia, SpainCATENA, 2015
- ‘Structure-from-Motion’ photogrammetry: A low-cost, effective tool for geoscience applicationsGeomorphology, 2012
- COMPARISON OF LASER SCANNING, PHOTOGRAMMETRY AND SFM-MVS PIPELINE APPLIED IN STRUCTURES AND ARTIFICIAL SURFACESISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 2012
- Knowledge based reconstruction of building models from terrestrial laser scanning dataISPRS Journal of Photogrammetry and Remote Sensing, 2009
- Modeling the World from Internet Photo CollectionsInternational Journal of Computer Vision, 2007
- Terrestrial laser scanning in geology: data acquisition, processing and accuracy considerationsJournal of the Geological Society, 2007
- Terrestrial laser scanning for monitoring the process of hard rock coastal cliff erosionQuarterly Journal of Engineering Geology and Hydrogeology, 2005