Effect of baking temperature on an organic-inorganic hybrid coating for magnesium alloy AZ31B
- 3 August 2026
- journal article
- Published by Emerald Publishing in Anti-Corrosion Methods and Materials
- p. 1-12
Abstract
Purpose: The purpose of this paper is to systematically investigate the effect of baking temperature on the morphology, thickness, adhesion and corrosion resistance of an organic-inorganic hybrid coating applied to magnesium alloy AZ31B, trying to elucidate the intrinsic curing-temperature-response mechanisms. Design/methodology/approach: A homogeneous organic-inorganic hybrid coating was prepared on magnesium alloy AZ31B using the sol–gel technique with tetraethyl orthosilicate (TEOS), 3-glycidoxypropyltrimethoxy silane (GPTMS) and triethylene tetramine (TETA). The influence of various baking temperatures (80 °C–130 °C) on the coatings were evaluated through scanning electron microscopy (SEM), energy-dispersive spectroscopy (SEM), atomic force microscopy, optical microscopy (OM), X-ray diffraction pattern (XRD), thickness measurements, scratch adhesion tests and electrochemical methods including potentiodynamic polarization and electrochemical impedance spectroscopy. Findings: The hybrid coating was mainly composed of amorphous SiO2. The hybrid coating showed dense microstructure, uniform thickness (∼20 µm) and intimate interfacial adhesion at the baking temperature of 110 °C, and significantly improved the corrosion resistance of the magnesium alloy, reducing the corrosion current density by approximately two orders of magnitude compared to the uncoated substrate. While adhesion gradually deteriorated with increasing temperature, optimal corrosion resistance and adhesion were achieved at 110 °C, where protection efficiency reached (98.5 ± 0.4)%. This is attributed to enhanced cross-linking density and barrier properties, despite the gradual adhesion loss. At higher temperatures (130 °C), microcrack formation due to excessive internal stress led to deteriorated coating integrity and corrosion performance, with protection efficiency dropping to (84.5 ± 1.1)%. Practical implications: The identified optimal curing temperature (110 °C) provides coating lines with a simple, readily implementable parameter. This process requires no complex compositional modifications, enabling manufacturers to achieve cost-effective production scale-up, reduced energy consumption and enhanced product durability without additional capital investment. Social implications: Enhanced corrosion protection extends magnesium component lifespans, reducing material waste and resource consumption. Lightweighting enabled by durable magnesium alloys contributes to lower vehicle emissions and improved energy efficiency, supporting global sustainability goals and environmental protection. Originality/value: This work elucidates the competing mechanisms between coating densification and adhesion degradation during thermal curing of GPTMS/TEOS/TETA-based hybrid coatings. It reveals that optimal protection at 110 °C is achieved when barrier property enhancement outweighs adhesion loss, prior to microcracking-dominated failure. This work provides a foundational understanding of process–performance relationships, which is essential for designing more complex coating systems.Keywords
This publication has 33 references indexed in Scilit:
- Creating reactive interfaces via anion-guided plasma electrolytic oxidation and tryptophan–TEOS hybrid coating for enhanced photocatalytic performanceAdvanced Composites and Hybrid Materials, 2025
- Synergistic enhancement of corrosion resistance and photocatalytic activity on AZ31 Mg alloy using chelating agent-infused layered double hydroxides over plasma electrolytic oxidation coatingsAdvanced Composites and Hybrid Materials, 2024
- Corrosion Inhibition of AZ31-xLi (x = 4, 8, 12) magnesium alloys in sodium chloride solutions by aqueous molybdateCorrosion Science, 2024
- Galvanic corrosion behavior between AZ91D magnesium alloy and copper in distilled waterCorrosion Science, 2021
- Surface texturing to enhance sol-gel coating performances for biomedical applicationsCIRP Annals, 2021
- Corrosion behavior of Al-1wt% Mg-0.85wt%Si alloy coated by micro-arc-oxidation using TiO2 and Na2MoO4 additives: Role of current densityJournal of Alloys and Compounds, 2017
- Effects of sintering temperature on the corrosion behavior of AZ31 alloy with Ca–P sol–gel coatingJournal of Alloys and Compounds, 2016
- Cutting forces and their modelling in plunge milling of magnesium-rare earth alloysThe International Journal of Advanced Manufacturing Technology, 2015
- Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applicationsActa Materialia, 2013
- Effect of sintering temperature on corrosion properties of sol–gel based Al2O3 coatings on pre-treated AZ91D magnesium alloyCorrosion Science, 2009