Abstract
Semiconducting single-walled carbon nanotubes (sc-SWCNTs) are attractive in chemical sensing [1] because of their peculiarities: As they present a single atom-thick wall and a quasi 1D form factor, sc-SWCNTs are especially sensitive to their surroundings' electrostatics. Moreover, their band gap of approximately 1 eV is much greater than room-temperature thermal energy while being in a convenient range for electronic applications. Also, their electronic structure exhibits van Hove singularities (sharp spikes in the density of states) that drastically alters their conductivity and optical properties when charge carriers are injected. Although sc-SWCNT electronic devices are very sensitive, they lack in selectivity and they usually need to be functionalized to implement a lock-and-key detection mechanism. In this talk, we will present various strategies for chemical sensing using enriched sc-SWCNTs. We will discuss the advantages and disadvantages of using sc-SWCNTs in electronic chemical sensing devices. Sub-ppm ammonia sensing will be demonstrated using a sc-SWCNT material wrapped with a decomposable polymer in a chemiresistor configuration. [2] Also using chemiresistors, CO2 detection has been achieved by designing a SWCNT-wrapping polymer with specific interactions. [3] Finally, we will present a strategy to differentiate the response of sensor elements to a variety of volatile analytes by changing the polymer gate dielectrics in a three-terminal bottom gate chemitransistor configuration. [4] This methodology opens the way to the implementation of sc-SWCNT-based chemitransistors in a printed cross-reactive sensor array. References [1] Schroeder, V. et al. Carbon Nanotube Chemical Sensors. Chem. Rev. 119, 599–663 (2019) [2] Li, Z. et al. Decomposable s-Tetrazine Copolymer Enables Single-Walled Carbon Nanotube Thin Film Transistors and Sensors with Improved Sensitivity. Adv. Funct. Mater. 1705568 (2018) [3] Guo, C. et al. Enrichment of Semiconducting Single-Walled Carbon Nanotubes with Indigo-Fluorene-Based Copolymers and Their Use in Printed Thin-Film Transistors and Carbon Dioxide Gas Sensors. ACS Sensors 5 2136–2145 (2020) [4] Lapointe, F. et al. Carbon Nanotube Transistors as Gas Sensors: Response Differentiation using Polymer Gate Dielectrics. ACS Appl. Polym. Mater. 1 3269-3278 (2019)