Metal release rate from AISI 316L stainless steel and pure Fe, Cr and Ni into a synthetic biological medium- a comparison
- 5 August 2008
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Environmental Monitoring
- Vol. 10 (9) , 1092-1098
Abstract
Metal release rates from stainless steel grade 316L were investigated in artificial lysosomal fluid (ALF), simulating a human inflammatory cell response. The main focus was placed on release rates of main alloying elements using graphite furnace atomic absorption spectroscopy, and changes in surface oxide composition by means of X-ray photoelectron spectroscopy. To emphasise that alloys and pure metals possess totally different intrinsic properties, comparative studies were performed on the pure alloying constituents: iron, nickel and chromium. Significant differences in release rates were observed due to the presence of a passive surface film on stainless steel. Iron and nickel were released at rates more than 300 times lower from the 316L alloy compared with the pure metals whereas the release rate of chromium was similar. Iron was preferentially released compared with nickel and chromium. Immersion in ALF resulted in the gradual enrichment of chromium in the surface film, a small increase of nickel, and the reduction of oxidized iron with decreasing release rates of alloy constituents as a result. As expected, released metals from stainless steel grade 316L were neither in proportion to the bulk alloy composition nor to the surface film composition.Keywords
This publication has 17 references indexed in Scilit:
- Metal release from various grades of stainless steel exposed to synthetic body fluidsCorrosion Science, 2007
- Metal release from stainless steel particles in vitro—influence of particle sizeJournal of Environmental Monitoring, 2006
- Factors that influence the release of metals from stainless steels exposed to physiological mediaCorrosion Science, 2006
- Comparison of metal release from various metallic biomaterials in vitroBiomaterials, 2005
- A Comparison of Release Rates of Cr, Ni, and Fe from Stainless Steel Alloys and the Pure Metals Exposed to Simulated Rain EventsJournal of the Electrochemical Society, 2005
- Release rates of chromium and nickel from 304 and 316 stainless steel during urban atmospheric exposure—a combined field and laboratory studyCorrosion Science, 2002
- Nickel release from stainless steelsContact Dermatitis, 1997
- Nickel release from 304 and 316 stainless steels in synthetic sweat. Comparison with nickel and nickel-plated metals. Consequences on allergic contact dermatitisCorrosion Science, 1993
- Nickel and iron in saliva of patients with fixed orthodontic appliancesActa Odontologica Scandinavica, 1991
- Quantitative Measurements of Passive Dissolution of Chromium, Iron, and Molybdenum from a Stainless SteelJournal of the Electrochemical Society, 1984