EFFECT OF AIRFLOW REVERSAL ON PACKED‐BED DRYING OF CARROTS
- 28 July 2010
- journal article
- Published by Wiley in Journal of Food Process Engineering
- Vol. 33 (4) , 684-700
Abstract
The effect of the periodical application of airflow reversals on drying rate has been investigated during the packed‐bed drying of carrots. Drying experiments were obtained from a complete 34 factorial design with air temperature (50, 70 and 90C), air velocity (2, 4 and 6 m/s), combined product thickness/bed height (0.001/0.05, 0.01/0.1 and 0.02/0.15 m/m) and frequency of application of the flow reversal (every 900 and 1800 s, and without reversals) as independent variables. Experimental data were fitted to the first‐order exponential model (FOEM) and the Page's model in order to estimate the drying rate constant. A normal quantile–quantile plot for the residuals demonstrated the inadequacy of the FOEM to describe satisfactorily the moisture evolution data. As expected, increasing air temperature and air velocity causes an increase on the drying rate, while a higher product and bed thickness causes the drying rate to decrease (P > 0.95). The effect of application of the airflow reversals was significant on the drying rate with resulting shorter drying times (P > 0.95). Furthermore, the drying rate was found to increase significantly with increase in the frequency of application of the airflow reversal (P > 0.995).PRACTICAL APPLICATIONS: Considerable moisture and temperature gradients may develop during batch drying of deep beds due to air saturation, causing the quality loss of the product due to drying stresses and degradation of heat‐sensitive materials. The periodical reversion of airflow direction is a practical and economical way to avoid these phenomena. In this work, the influence of airflow reversal and several drying parameters on the overall drying rate is statistically determined during packed‐bed drying of carrots. Furthermore, the periodical reversion of airflow was demonstrated to reduce (up to 18%) the required time to achieve a given degree of drying, which may lead to decreases in energy consumption.Keywords
This publication has 11 references indexed in Scilit:
- Stack-Wide Behavior for Hardwood DryingDrying Technology, 2007
- CHANGES IN THE DRYING CHARACTERISTICS AND WATER ACTIVITY VALUES OF SELECTED PISTACHIO CULTIVARS DURING HOT AIR DRYINGJournal of Food Process Engineering, 2007
- An Experimental and Modeling Investigation on Drying of Ragi (Eleusine corocana) in Fluidized BedDrying Technology, 2006
- Stationary versus Fluidized-Bed Drying of High-Moisture Paddy with Rest PeriodDrying Technology, 2006
- Mathematical simulation of convection food batch drying with assumptions of plug flow and complete mixing of airJournal of Food Engineering, 2005
- SIMULATION OF THE HEAT AND MOISTURE TRANSFER PROCESS DURING DRYING IN DEEP GRAIN BEDSDrying Technology, 1997
- Simulation of Coffee Drying in a Fixed Bed with Periodic Airflow ReversalJournal of Agricultural Engineering Research, 1995
- Simulation of packed bed drying of foodstuffs with airflow reversalJournal of Food Engineering, 1995
- Drying of Coffee (Coffea arabica L.) in a Fixed Bed with a Simulated Periodic Airflow ReversalJournal of Agricultural Engineering Research, 1994
- Mathematical Simulation of Corn Drying — A New ModelTransactions of the ASAE, 1968