Scalable Freeze-Tape-Casting Fabrication and Pore Structure Analysis of 3D LLZO Solid-State Electrolytes
Authors:
- 20 December 2019
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 12 (3) , 3494-3501
Abstract
Nonflammable solid-state electrolytes can potentially address the reliability and energy density limitations of lithium ion batteries. Garnet-structured oxides such as Li7La3Zr2O12 (LLZO) are some of the most promising candidates for solid-state devices. Here, 3D solid-state LLZO frameworks with low tortuosity pore channels are proposed as scaffolds, into which active materials and other components can be infiltrated to make composite electrodes for solid-state batteries. To make the scaffolds, we employed aqueous freeze tape casting (FTC), a scalable and environmentally friendly method to produce porous LLZO structures. Using synchrotron radiation hard X-ray micro computed tomography, we confirm that LLZO films with porosities up to 75% were successfully fabricated from slurries with a relatively wide concentration range. The acicular pore size and shape at different depths of scaffolds were quantified by fitting the pore shapes with ellipses, determining the long- and short-axes and their ratios, and investigating the equivalent diameter distribution. The results show that relatively homogeneous pore sizes and shapes were sustained over a long range along the thickness of the scaffold. Additionally, these pores had low tortuosity and the wall thickness distributions were found to be highly homogeneous. These are desirable characteristics for 3D solid electrolytes for composite electrodes, both in terms of ease of active material infiltration and also minimization of Li diffusion distances in electrodes. The advantages of the FTC scaffolds are demonstrated by the improved conductivity of LLZO scaffolds infiltrated with poly(ethylene oxide)/Li trifluoromethanesulfonate imide (PEO/LITFSI) compared to those of PEO/LiTFSI films alone or composites containing LLZO particles.Keywords
Funding Information
- Ministry of Science and Technology of the People's Republic of China (2016YFB0700404)
- Vehicle Technologies Program (DE-AC02-05CH11231)
- China Scholarship Council (201606280062)
- National Natural Science Foundation of China (51671154, 91860109)
- International Joint Laboratory for MicroNano Manufacturing and Measurement Technologies
- Collaborative Innovation Center of high-end Manufacturing Equipment
This publication has 31 references indexed in Scilit:
- New horizons for inorganic solid state ion conductorsEnergy & Environmental Science, 2018
- Mechanism of Lithium Metal Penetration through Inorganic Solid ElectrolytesAdvanced Energy Materials, 2017
- Reviving the lithium metal anode for high-energy batteriesNature Nanotechnology, 2017
- Transition of lithium growth mechanisms in liquid electrolytesEnergy & Environmental Science, 2016
- Electrochemical Stability of Li10GeP2S12 and Li7La3Zr2O12 Solid ElectrolytesAdvanced Energy Materials, 2016
- Elastic Properties of the Solid Electrolyte Li7La3Zr2O12(LLZO)Chemistry of Materials, 2015
- Li‐ion batteries: basics, progress, and challengesEnergy Science & Engineering, 2015
- Development of Bipolar All-solid-state Lithium Battery Based on Quasi-solid-state Electrolyte Containing Tetraglyme-LiTFSA Equimolar ComplexScientific Reports, 2015
- Room temperature elastic moduli and Vickers hardness of hot-pressed LLZO cubic garnetJournal of Materials Science, 2012
- Compatibility of Li[sub 7]La[sub 3]Zr[sub 2]O[sub 12] Solid Electrolyte to All-Solid-State Battery Using Li Metal AnodeJournal of the Electrochemical Society, 2010