Online Fault Tolerance Technique for TSV-Based 3-D-IC
Authors:
- 15 August 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 23 (8) , 1567-1571
Abstract
This brief presents the design, validation, and evaluation of an efficient online fault tolerance technique for fault detection and recovery in presence of three through-silicon-vias (TSV) defects: 1) voids; 2) delamination between TSV and landing pad; and 3) TSV short-to-substrate. The technique employs transition delay test for TSV fault detection. Fault recovery is achieved by employing redundant TSVs and rerouting signals to fault-free TSVs. This technique is efficient because it requires a small (2× number of TSVs per group) number of clock cycles for fault detection and recovery. Synthesis results using 130-nm design library show that 100% repair capability can be achieved with low area overhead (4% for the best case).Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/K000810/1)
- Department of Electrical Engineering and Electronics, University of Liverpool, Merseyside, U.K.
This publication has 17 references indexed in Scilit:
- On effective and efficient in-field TSV repair for stacked 3D ICs2013
- Delay Test for Diagnosis of Power SwitchesIEEE Transactions on Very Large Scale Integration (VLSI) Systems, 2013
- On effective TSV repair for 3D-stacked ICs2012
- Cost-Effective TSV Grouping for Yield Improvement of 3D-ICs2011
- Design for reliability in via middle and via last 3-D chipstacks incorporating TSVs2010
- Reliability approach of high density Through Silicon Via (TSV)2010
- 8 Gb 3-D DDR3 DRAM Using Through-Silicon-Via TechnologyIEEE Journal of Solid-State Circuits, 2009
- Electrical Modeling and Characterization of Through Silicon via for Three-Dimensional ICsIEEE Transactions on Electron Devices, 2009
- A low-overhead fault tolerance scheme for TSV-based 3D network on chip links2008
- Enabling SOI-based assembly technology for three-dimensional (3d) integrated circuits (ICs)2006