Mathematical Model for Regular and Irregular PV Arrays with Improved Calculation Speed
Open Access
- 21 December 2020
- journal article
- research article
- Published by MDPI AG in Sustainability
- Vol. 12 (24) , 10684
Abstract
Photovoltaic (PV) systems are usually developed by configuring the PV arrays with regular connection schemes, such as series-parallel, total cross-tied, bridge-linked, among others. Such a strategy is aimed at increasing the power that is generated by the PV system under partial shading conditions, since the power production changes depending on the connection scheme. Moreover, irregular and non-common connection schemes could provide higher power production for irregular (but realistic) shading conditions that aere caused by threes or other objects. However, there are few mathematical models that are able to predict the power production of different configurations and reproduce the behavior of both regular and irregular PV arrays. Those general array models are slow due to the large amount of computations that are needed to find the PV current for a given PV voltage. Therefore, this paper proposes a general mathematical model to predict the power production of regular and irregular PV arrays, which provides a faster calculation in comparison with the general models that were reported in the literature, but without reducing the prediction accuracy. The proposed modeling approach is based on detecting the inflection points that are caused by the bypass diodes activation, which enables to narrow the range in which the modules voltages are searched, thus reducing the calculation time. Therefore, this fast model is useful in designing the fixed connections of PV arrays that are subjected to shading conditions, in order to reconfigure the PV array in real-time, depending on the shading pattern, among other applications. The proposed solution is validated by comparing the results with another general model and with a circuital implementation of the PV system.Keywords
This publication has 23 references indexed in Scilit:
- Experimental analysis to extract maximum power from PV array reconfiguration under partial shading conditionsEngineering Science and Technology, an International Journal, 2019
- Modeling, simulation and performance analysis of solar PV array configurations (Series, Series–Parallel and Honey-Comb) to extract maximum power under Partial Shading ConditionsEnergy Reports, 2018
- A Procedure for Modeling Photovoltaic Arrays under Any Configuration and Shading ConditionsEnergies, 2018
- General modeling procedure for photovoltaic arraysElectric Power Systems Research, 2018
- Adaptive GA-based reconfiguration of photovoltaic array combating partial shading conditionsNeural Computing and Applications, 2016
- Experimental Parameter Extraction in the Single-Diode Photovoltaic Model via a Reduced-Space SearchIEEE Transactions on Industrial Electronics, 2016
- Determination of the optimal configuration for a photovoltaic array depending on the shading conditionSolar Energy, 2013
- A model of photovoltaic fields in mismatching conditions featuring an improved calculation speedElectric Power Systems Research, 2013
- Modeling of photovoltaic fields in mismatched conditions for energy yield evaluationsElectric Power Systems Research, 2011
- Electrical PV Array Reconfiguration Strategy for Energy Extraction Improvement in Grid-Connected PV SystemsIEEE Transactions on Industrial Electronics, 2009