The dynamics of parison development in blow molding
Authors:
- 1 August 1980
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 20 (12) , 773-777
Abstract
An experimental program was carried out to study the dynamics of parison swell and development in extrusion‐blow molding. Two commercial blow molding grade polyethylene resins were employed in conjunction with an Impco, Model A13‐R12 reciprocating screw blow molding machine equipped with a cylindrical bottle mold. Parison weight swell was measured with the aid of a parison pinch‐off mold. In order to obtain more reliable and useful information regarding diameter and thickness swell of the parison and the dynamics of parison formation and development, high speed cinematography was employed. Data obtained by this technique are more reliable than results obtained with the pinch‐off mold alone. They also give further insight into the phenomena of swell, sag, and parison spring back or recovery.Keywords
This publication has 5 references indexed in Scilit:
- Determination of rheological parameters from parison extrusion experimentsPolymer Engineering & Science, 1978
- A Rheological Product Problem in Blow MoldingTransactions of the Society of Rheology, 1975
- Analysis of Factors Determining Parison Properties in High Shear Rate Blow MoldingTransactions of the Society of Rheology, 1975
- Parison material distribution: Viscoelastic and programming effectsPolymer Engineering & Science, 1973
- Variables affecting parison diameter swell and their correlation with rheological parametersPolymer Engineering & Science, 1973