Simplified and Low-Cost Characterization of Medium-Voltage Low-Power Voltage Transformers in the Power Quality Frequency Range
Open Access
Abstract
The distribution network is experiencing a massive deployment of intelligent electronic devices (IEDs) such as energy meters, protective devices, and phasor measurement units (PMUs). This phenomenon resulted, on the one hand, in (i) the availability of distributed measurement systems capable of monitoring and collecting measurements from the distribution network, and (ii) increasing awareness of the system operator about the status of the network. On the other hand, such a significant number of devices require to be characterized, over the years, and assessed in both sinusoidal and distorted conditions. However, the characterization process may require a huge investment of money and time considering the low availability of reference instruments and accredited laboratories. To this purpose, this paper presents a simple and fast test procedure, performed with cheap and low-voltage instrumentation, to characterize two off-the-shelf low-power medium-voltage sensors in the power quality frequency range. In detail, the paper describes the measurement setup developed for the characterization and the performed tests. In addition, the method was also reproduced with reference equipment for validation purposes. Lastly, for both tests, an uncertainty evaluation was performed to quantify the goodness of the proposed method. From the results, it is possible to appreciate that the designed cheap and simple test can achieve as accurate results as those of a sophisticated and expensive equipment.Keywords
Funding Information
- European Metrology Programme for Innovation and Research (19NRM05)
This publication has 31 references indexed in Scilit:
- Smart Characterization of Rogowski Coils by Using a Synthetized SignalSensors, 2020
- A General Easy-to-Use Expression for Uncertainty Evaluation in Residual Voltage MeasurementIEEE Transactions on Instrumentation and Measurement, 2019
- Unbiased Minimum Variance Filter-Based Generator State Estimation Using PMU Measurements for Unknown Generator InputIEEE Systems Journal, 2018
- Distributed voltage control for active distribution networks based on distribution phasor measurement unitsApplied Energy, 2018
- Overcoming Frequency Response Measurements of Voltage Transformers: An Approach Based on Quasi-Sinusoidal Volterra ModelsIEEE Transactions on Instrumentation and Measurement, 2018
- Uncertainty Bounds of Transmission Line Parameters Estimated From Synchronized MeasurementsIEEE Transactions on Instrumentation and Measurement, 2018
- Uncertainty sources analysis of a calibration system for the accuracy vs. temperature verification of voltage transformersJournal of Physics: Conference Series, 2018
- Performance evaluation of an energy meter for low-voltage system monitoringJournal of Physics: Conference Series, 2018
- A practical approach to evaluation of accuracy of inductive current transformer for transformation of distorted current higher harmonicsElectric Power Systems Research, 2015
- A Simple Method for the Calibration of Traditional and Electronic Measurement Current and Voltage TransformersIEEE Transactions on Instrumentation and Measurement, 2009