Depth-graded multilayers for application in transmission geometry as linear zone plates
Authors:
- 1 December 2005
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 98 (11) , 113519
Abstract
Fresnel zone plates for x-ray focusing optics are typically made using lithographic techniques. To achieve optimum efficiency for hard x rays, a depth of several microns is required, which limits the minimum zone width and hence minimum focal spot size achievable using lithography. We are exploring the fabrication of zone plates by an alternative technique that surmounts these limitations: the growth of a multilayer film to be used in transmission (Laue) diffraction geometry, in which the thickness of consecutive layers gradually increases according to the Fresnel zone formula; the film is sectioned after growth to the required depth. For a planar multilayer, this produces a linear zone plate that can focus x rays in one dimension. Here we report the growth and characterization of a depth-graded multilayer suitable for use as a zone plate for hard x-ray focusing. The multilayer has a total of 470 alternating layers of and Si with thicknesses increasing monotonically from 15 to 60 nm, for a total thickness of . One of the major challenges is to understand and select the right material system for this kind of thick multilayer. We have found that is a promising system. A comparison between and multilayers is presented.
Keywords
This publication has 27 references indexed in Scilit:
- 20-nm-resolution Soft x-ray microscopy demonstrated by use of multilayer test structuresOptics Letters, 2003
- Thickness determination of metal thin films with spectroscopic ellipsometry for x-ray mirror and multilayer applicationsJournal of Vacuum Science & Technology A, 1999
- Interfacial roughness and related growth mechanisms in sputtered W/Si multilayersPhysical Review B, 1996
- Nanometer Spatial Resolution Achieved in Hard X-Ray Imaging and Laue Diffraction ExperimentsScience, 1994
- Design and characterization of x-ray multilayer analyzers for the 50–1000 eV regionJournal of X-Ray Science and Technology, 1990
- Tabletop x-ray microscope using 8 keV zone platesOptical Engineering, 1990
- The microstructure of sputter‐deposited coatingsJournal of Vacuum Science & Technology A, 1986
- Multilayers For X-Ray OpticsOptical Engineering, 1986
- Phase zone plates for x rays and the extreme uvJournal of the Optical Society of America, 1974
- Formation of Optical Images by X-RaysJournal of the Optical Society of America, 1948