An Investigation into Removing Zinc from the Zinc-Bearing Dusts Using the Cold Briquetting-Direct Reduction Process
Open Access
Abstract
This study developed a composite binder cold briquetting-direct reduction process for zinc removal and resource recovery from zinc-containing dust. Through systematic briquetting and reduction experiments, the optimal briquette parameters were identified, and the mechanisms of zinc migration and removal during reduction were discussed. The results showed that under optimized reduction conditions at 1275 °C for 25 min and with 4% carbon content in the briquettes, the process achieved a zinc removal rate of 98.25% and an iron metallization rate of 90.54%, indicating high Zn removal performance under the tested conditions. Notably, compared with briquettes prepared with conventional organic binders (OB1), the composite binder (CB1) briquettes exhibited higher compressive strength while maintaining comparable Zn removal and metallization performance. The CB1 offers both economic advantages and improved mechanical strength, being successfully applied in industrial lines. Moreover, this process offers an industrially applicable route for the efficient treatment and resource utilization of zinc-bearing dust in the steel industry.Keywords
Funding Information
- National Key Research and Development Program of China (2023YFC3903900)
- National Key Research and Development Program of China (2023YFC3903904)
This publication has 31 references indexed in Scilit:
- Research status and development of extraction process of zinc-bearing dust from ironmaking and steelmaking—a critical reviewJournal of Iron and Steel Research International, 2023
- Treatment of strong alkaline wastewater from neutral leaching of EAF dust by precipitation and ion exchangeApplied Water Science, 2023
- Rotary hearth furnace for steel solid waste recycling: Mathematical modeling and surrogate-based optimization using industrial-scale yearly operational dataChemical Engineering Journal, 2023
- A high-efficiency separation process of Fe and Zn from zinc-bearing dust by direct reductionJournal of Iron and Steel Research International, 2022
- Carbothermic Reduction of Zinc Containing Industrial Wastes: A Kinetic ModelMetallurgical and Materials Transactions B, 2021
- Hydrometallurgical Processes for the Recovery of Metals from Steel Industry By-Products: A Critical ReviewJournal of Sustainable Metallurgy, 2020
- Cold Briquetting of DRI Fines for Use in Steel Making ProcessTransactions of the Indian Institute of Metals, 2019
- The Strength and Density of Green and Reduced Briquettes Made with Iron Ore and CharcoalJournal of Sustainable Metallurgy, 2016
- Numerical simulation of the direct reduction of pellets in a rotary hearth furnace for zinc-containing metallurgical dust treatmentInternational Journal of Minerals, Metallurgy and Materials, 2013
- Effect of gangue content on the swelling behaviour of iron ore pelletsMinerals Engineering, 1990