On the evaluation of Alkaline‐Surfactant‐Polymer flooding in a field scale: Screening, modelling, and optimization
- 11 April 2017
- journal article
- research article
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 95 (8) , 1615-1625
Abstract
Chemical enhanced oil recovery methods, including alkaline surfactant polymer (ASP) flooding, have found special significance for oil reservoirs. ASP flooding provides different situations based on ratio of injection of three ASP components. This study identifies the behaviour of injection components and their interaction, investigating the synergy between them. To this end, an Iranian oil reservoir is studied. The factors influencing the injection process are identified and then a combination of these factors and the concentration of ASP components are modelled. All modelling results are fitted with R‐squared and adjusted R‐squared values above 0.96. Finally, the optimization is conducted to determine the best injection scenario. The most important aspect of this study is to investigate simultaneously the effect of different parameters of ASP in a real case. The screening results show that the effect of polymer on viscosity is the most influential factor in ASP flooding. The modelling results show that water cut in the case of simultaneous injection of three components is less than other cases of injection. This represents the synergy of components in the injection process during ASP flooding. The miscibility between water and polymer solution also leads to less produced water and more produced oil. In the final stage, the optimization results show that the optimal scenario is injection of surfactant and polymer with the greatest amount of miscibility between water and polymer solution. It can be concluded that with this approach, ASP injection can efficiently be analyzed and optimized from a technical point of view.Keywords
This publication has 29 references indexed in Scilit:
- Experimental study on adsorption of a new surfactant onto carbonate reservoir samples—application to EORThe Canadian Journal of Chemical Engineering, 2013
- Nonionic Surfactant for Enhanced Oil Recovery from Carbonates: Adsorption Kinetics and EquilibriumIndustrial & Engineering Chemistry Research, 2012
- Adsorption–Desorption of Surfactant for Enhanced Oil RecoveryTransport in Porous Media, 2011
- Empirical Modeling of Gravity Drainage in Fractured Porous MediaEnergy & Fuels, 2011
- Development and application of dilute surfactant–polymer flooding system for Shengli oilfieldJournal of Petroleum Science and Engineering, 2009
- Nelder-Mead algorithmScholarpedia, 2009
- Favorable Attributes of Alkaline-Surfactant-Polymer FloodingSPE Journal, 2008
- Global sensitivity analysis of Alkali–Surfactant–Polymer enhanced oil recovery processesJournal of Petroleum Science and Engineering, 2007
- An optimization methodology of alkaline–surfactant–polymer flooding processes using field scale numerical simulation and multiple surrogatesJournal of Petroleum Science and Engineering, 2005
- Interactions between alkali/surfactant/polymer and their effects on emulsion stabilityColloids and Surfaces A: Physicochemical and Engineering Aspects, 2000