Fabrication and Characterization of Nanocarbon-Based Nanofluids by Using an Oxygen–Acetylene Flame Synthesis System
Authors:
Open Access
- 13 June 2016
- journal article
- research article
- Published by Springer Nature in Discover Nano
- Vol. 11 (1) , 1-13
Abstract
In this study, an oxygen–acetylene flame synthesis system was developed to fabricate nanocarbon-based nanofluids (NCBNFs) through a one-step synthesis method. Measured in liters per minute (LPM), the flame’s fuel flows combined oxygen and acetylene at four ratios: 1.5/2.5 (P1), 1.0/2.5 (P2), 0.5/2.5 (P3), and 0/2.5 (P4). The flow rate of cooling water (base fluid) was fixed at 1.2 LPM to produce different nanocarbon-based materials (NCBMs) and various concentrations of NCBNFs. Tests and analyses were conducted for determining the morphology of NCBMs, NCBM material, optical characteristics, the production rate, suspension performance, average particle size, zeta potential, and other relevant basic characteristics of NCBNFs to understand the characteristics and materials of NCBNFs produced through different process parameters (P1–P4). The results revealed that the NCBMs mainly had flaky and spherical morphologies and the diameters of the spherical NCBMs measured approximately 20–30 nm. X-ray diffraction and Raman spectroscopy revealed that the NCBMs contained graphene oxide (GO) and amorphous carbon (AC) when the oxygen flow rate was lower than 1.0 LPM. In addition, the NCBMs contained reduced GO, crystalline graphite (graphite-2H), and AC when the oxygen flow rate was higher than 1.0 LPM. The process parameters of P1, P2, P3, and P4 resulted in NCBMs produced at concentrations of 0.010, 0.013, 0.040, and 0.023 wt%, respectively, in NCBNFs. All the NCBNFs exhibited non-Newtonian and shear-thinning rheological properties. The P4 ratio showed the highest enhancement rate of thermal conductivity for NCBNFs, at a rate 4.85 % higher than that of water.Keywords
Funding Information
- Ministry of Science and Technology of Republic of China (Taiwan) (MOST 103-2221-E-003-021-)
- Ministry of Science and Technology of Republic of China (Taiwan) (MOST 104-2221-E-003 -019 -MY2)
This publication has 38 references indexed in Scilit:
- Studies on the mechanical stretchability of transparent conductive film based on graphene-metal nanowire structuresDiscover Nano, 2015
- A review on how the researchers prepare their nanofluidsInternational Journal of Thermal Sciences, 2014
- A review of nanofluid heat transfer and critical heat flux enhancement—Research gap to engineering applicationProgress in Nuclear Energy, 2013
- A review of the applications of nanofluids in solar energyInternational Journal of Heat and Mass Transfer, 2013
- Enhanced electrical properties of vertically aligned carbon nanotube-epoxy nanocomposites with high packing densityDiscover Nano, 2012
- A review on boiling heat transfer enhancement with nanofluidsDiscover Nano, 2011
- Enhanced thermal conductivities of nanofluids containing graphene oxide nanosheetsNanotechnology, 2009
- Atomic Force and Scanning Tunneling Microscopy Imaging of Graphene Nanosheets Derived from Graphite OxideLangmuir, 2009
- High-throughput solution processing of large-scale grapheneNature Nanotechnology, 2008
- One-Step Water-Assisted Synthesis of High-Quality Carbon Nanotubes Directly from GraphiteJournal of the American Chemical Society, 2003